There are some straps at the backside of each seat near the floor that are used as I'll describe. There are also some levers and bars that can alternately be used to accomplish the same things. You need to pull each strap or lever to figure them out. (1) Fold the back of the seat down against the seat ( the part you sit on ), A little lever or a certain strap from the back will do this. (2) Tip the rear part of the seat up by pulling another strap. Now you'll have the seat standing on its nose, and you're ready to actually remove it fron its floor mounting in the floor. (3) Now you pull on a cross bar or rod near the floor, and the seat will reverse from the bracket that is recessed in the floor. Reinstalling is the part that takes practice, but if you put it right back in, just to get used to how things work when you removed the seat, you'll be able to do it for real when you want to put the seat back.
u dont
Buy a kit from auto parts or Wal-Mart comes with instructions
how do you change a brake booster valve to a 1998 Pontiac transport
4t65e
Pontiac Trans Sport Montana began production in 1998 for US & 1999 for Canada. More info: http://en.wikipedia.org/wiki/Pontiac_Trans_Sport
What causes a 1998 Pontiac transport to run hot and engine shuts off
3400 v6
The proper tire size for a 1998 Pontiac Transport is P205/70R15. This info is on a sticker placed on the driver's door jam.
The ECM on a 1998 Pontiac Transport with the 3.4 V6 engine is located on the passenger side. It is behind the glove box.
When I bought my 1998 Pontiac it came with a kit that had the hoses. On left side of van by the lift gate is a panel cover. Take it off & insert the hose. The compressor should work. At least that's how mine works.
THERE IS NO FREON IN A 98 IT IS R134
pro