by pressing a button or something if your are stuck ask the staff present on the building
how to take off the clutch fan in 96 blazer,trying to change water pump?
loosen the bolts on the water pump pull and take off the belt, then take off the pully. take the hoses off then remove the bolts from the water pump and pull it off
yes you do i had to take mine off when i replaced my water pump
How do you take off the water pump on a 1999 saab 95 se?
you have to take the alternatoer and braket off to loosen 2 bolts and it should come off.
YES you do. That's the only way.
95 Grand AM V6 water pump is fairly easy. You have to take the serpentine belt off. The water pump pully has 4 bolts in it take them out the pully slides off and there are 4 more bolts that hold the water pump in take those out and the water pump slides out.
Remove battery. Remove left engine brace. Remove serpentine belt. Take off water pump pulley. Take off water pump! This was the easiest water pump I ever replaced.
to change the water pump loosen all the pulley bolts, then take the belt off. after you get the pulley comletely off, there will be 5 more bolts. take them off and the water pump will come off. you might have to tap alittle.
Not sure on a '94, but on a '90 w/ a 1.6 you just remove the pulley bolts on the water pump, take off the pulley and belt, remove the thermostat housing on the side of the water pump, and then remove the water pump bolts. After that you can take off the water pump.
You take it to the shop. You have to take off the timing belt to do the water pump
Answerwell if it is in a 95 you have to take off the coil pack then the power steering pump then take of the bolts on the water pump