In my experience, one wire will have little ridges or ribs along its' entire length. The other one will be smooth. Not sure which one is supposed to be positive or negative, but you can just assign one wire positive and the other negative. Just don't mix them up and you'll be able to tell which one is which at either end of the pair of wires. Hope this helps.:)
The positive speaker wire is a solid color, your negative wire should have a stripe on it.
On the car battery, the positive wire is red and the negative wire is black. If the body of the car is metal or conducts electricity, then the body of the car serves as the negative wire. The metal in the engine serves as the negative wire.
Check the wires with a multimeter.
In a DC circuit Red is positive and Black is negative. In AC systems White is neutral and Ground is green or green-yellow stripe.
The negative wire is grounded.AnswerThe negative wire is grounded.
copper is positive
The longer wire is the positive end, but if the wires are the same length, check inside the LED. There are two easily seen parts connected by a wire, the smaller is the positive.
The positive speaker wire is red while the negative speaker wire is black on a 2008 pathfinder.
The red wire is Positive, (+) and the Black wire is Negative. (-)
It could be when the positive wire is plugged in the negative slot and the negative wire is plugged in the positive slot. This can make the readings negative.
Hot is positive.
If you want to run both coils,you have to wire the positive to positive and negative to negative on your sub,then run a wire from each plug to the amp. Positive to the positive side of the amp and negative to negative side of the amp,(you can run in bridge mode or stereo if your amp can handle the load)