0
When you want teset optical aging and life of led, we will be talk the standard that's LM-80, TM-21, L70, L50 etc. LEDLM-80PL LED Optical Aging Test Instrument, this device is designed according to these standards, and it can fully meet test requires, and the test result have high accuracy and stable.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Why are some bulbs dimmer than others?
There are two types of modern bulbs, CFL and LED and they are available in various wattages. While more expensive initially, there is tremendous energy savings over the extended life span.
Who led the second group to reach the south pole?
Captain Robert Falcon Scott led a team that reached the South Pole about one month after the first team, led by Roald Amundsen.
Who led the moon landing mission?
Cicero
Who invented the Tix led Clock?
James Thompson
One of the discoveries that led to the modern view of the Solar System was that the BLANK of the planets were ellipses?
One of the discoveries that led to the modern view of the Solar System was that the "orbits" of the planets were ellipses.
Do optical mice have lasers in them?
No optical mice do not have lasers in them, they use LED's (light emmiting diodes).
Led in optical mouse keeps blinking?
Mouse pad.
How you can convert an electrical signal into an optical signal?
electrical signal can be converted to an optical sigal by using a LED or SOA(semiconductor optical amplifier). LED is the cheaper option but have the drawback of larger linewidth. Typically used for LAN (local area network). SOA produces an optical signal mostly by direct modulation tecnique .
What happened in Benjamin's life?
Benjamin led a long and unique life, aging in reverse due to a rare condition. Despite challenges and misunderstandings, he embraced his differences and found love and fulfillment in unexpected places. His story sheds light on the unpredictable nature of life and the importance of living in the moment.
What is the LM-80 for LED Lumen Maintenance Test?
IESNA-LM-80 (Measuring Lumen Maintenance of LED Light sources) is an approved method by Lighting Engineering Association of North America (IESNA) for the third generation SSL products; it mentioned the measurement standard and method. The main purpose is that measure and records the LED lumen maintenance change along with time, in other word, it is applied to test LED aging life. Compare with the traditional light source, theoretically LED life can reach to 50000 hours. So it is hard to test the LED life, because it is impossible to light up the LED till it dies, and it is also unworkable because there are so many different types and different power of LED, if the problem can not solve, it will become a big resistance to develop and push LED products. Considering the real situation, IESNA passed the LM-80-08 approved method, which provides the guidance and specification for measuring and recording LED lumen vs time, and calculate the life time of LED luminaires in the end. Also it solves an urgent problem for LED industry. When we say LED lumen maintenance and LED aging life, we will talk about LM-80, TM-21, TM-82 and etc. so it is necessary to explain them. LM-80-08 put forward the measurement method and then obtains the data, TM-21 put forward the calculate method and then obtains the data. In those standards, they mentioned L70, L50, L30 And etc. that means the time to 70% lumen maintenance, time to 50% lumen maintenance and time to 30% lumen maintenance. From the data, we can find lumen changing along with the time. Generally speaking, time to 70% lumen maintenance will be defined as the LED life. According to LM-80, the test time should be no less than 6000h, and 10000h is recommended. And during the test, temperature is limited at three points, first one is 55℃，second one is 85℃，and the third one is depends on the manufacturer. And generally, the test report should includes the following information: number of LED light source test, description of LED light source, description of auxiliary device, operating cycle, ambient conditions including airflow, temperature and relative humidity, Drive current of the LED light source during lifetime test, Initial luminous flux and forward voltage at photometric measurement current, Lumen maintenance data for each individual LED light source along with median value, standard deviation, minimum and maximum lumen maintenance value for all of the LED light sources, Observation of LED light source failures including the failure conditions and time of failure, LED light source monitoring interval, Photometric measurement uncertainty, Chromaticity shift reported over the measurement time. LPCE-2(LMS-9000A) high accuracy spectroradiometer and integrating sphere test system, this system not only meet the requirements of CIE, EN and lm-79 clause 9.1, and also meet the requirements of LM-80. Base on the normal function, Lisun's engineer developed new software to meet the requirements of LM-80. So LPCE-2 has two software, one is to test the luminous flux, color temperature, color rending index, wavelength, spectrum, light efficiency and etc. the other is to test and record the data of lumen vs time, according to the data, we can generally predict the LED life. But the main function for this system is to test the photoelectric and colorimetric parameters of LED, so it is not a standard way to test LED life, the test result and test report can not regarded as the final evaluation. But along with the technology developing, LISUN push LEDLM-80PL LED lumen maintenance and life test system into the market, this system is designed according to LM-80-08, TM-82, TM-21 and etc. so it is completely meet the relevant standards. LEDLM-80PL is developed base on the mature system of LPCE-2 (LMS-9000A). In the hardware, LEDLM-80PL still adopts the high accuracy CCD spectroradiometer to keep the high precision. And the most important is the software, the software absorbs the essence of the LPCE - 2, and then combine Arrhenius model to build a newly reliable LED life predict software. Users will only need to test the lamp for hundreds of hours under certain temperature, then the software will calculate the time to 70% (50%, 30%) lumen maintenance at this temperature, it will greatly help to improve the test efficiency and the accuracy and reliability of LED lumen maintenance testing.
How do you keep the led indicator light inside the scroll wheel lit on your hp wireless optical comfort mouse?
hp optical comfort mouse green scroll light blinking
What demographic change led to president George W Bush's proposal to privatize social security?
an aging population
Who inented fibers?
In 1952, physicist Narinder Singh Kapany conducted experiments that led to the invention of optical fiber
How have optical fibers led to the use of visible light?
There seems to be some confusion here! Visible light was being used - to see things, for example - millions of years before optical fibres were invented!
What is the life difference between lcd TV and led TV?
lcd having more life then led.
How do you test led distribution intensity curve and export IES files?
when you want to test led distribution intensity curve and IES files, we will be talk this kind of equipment which is goniophotometer. This device is an automatic light distribution intensity 3D curve testing system. It can test many Optical parameters, like total luminous flux, zonal luminous flux etc. According to IESNA-LM-79-08, we will talk the rotating mirror goniophotometer, like LSG-2000 Goniophotometer with Rotating Mirror, this kind of goniophotometer can fully meet demand, it combined all advantages of goniophotometer, the test result have high accuracy.
The demarcation of ageing is not the same in all areas justify?
The demarcation of aging varies due to cultural factors, social norms, and biological differences among populations. In some cultures, reaching a certain age may signify a transition into old age, while in others, it may depend more on life events or milestones. Additionally, advancements in healthcare and technology have also led to differences in how people perceive and experience aging.
