0
You use a device called a megger or meg ohm meter. Have the voltage range of the megger set to the working voltage of the motor. The first test should be to ground. One lead on the frame of the motor , the other lead one of the 6 wires. Test all 6 wires. If no ground shows up, test the individual coils against one another. If the coils are not grounded together, the motor is safe to energize.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Why and how does insulation depend on voltage?
Where you find wire insulation with ratings of 300 volts, 600 volts and 1000 volts, these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, insulation on a wire is tested to destruction. The label that is given to wire's insulation, as a result of the tests, is the highest safest voltages that can be applied to that particular wire. So when you see a wire that has a label stating that it is rated for 300 volts it means that any voltage under and up to 300 volts is safe to apply.
Is there a voltage carrying limit of wire?
Yes it depends on many variables such as what the wire is made of the size of the wire whether the wire is a multi strand wire. What governs the amount of voltage a wire can carry is the insulation that is wrapped around the wire. Like wire with ratings of 300 volts, 600 volts and 1000 volts these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, insulation is tested to destruction. The label that is given to the wire insulation as a result of the tests is the highest safest voltages that can be applied to that particular type.
Which plastic is used for making wire insulation?
Electrical insulation on a wire or cable composed of plastic. Most wires and cables use plastic insulation. Some other types of insulation used on wires and cables are: enamel, cloth, natural rubber, gutta percha, ceramic, etc.
What does it mean when motor ticks?
i have a metal sleeve over each spark plug wire at the motor.....cant get the wire out to get to the plugs?? how do i get the wire off the plug??
Why do a megger test?
A megger test is done to check the insulation factor of wires or devices. This is to make sure that when the working voltage is applied, a short circuit to ground will not occur due to a problem with the insulation of the device or wire.
What size of wire need to test using megger?
A megger is used to test insulation values. It doesn't have to be wire only. Any device that has electricity flowing through it can have its electrical insulation properties checked to see if there is any current leakage to ground. So to answer your question any size wire's insulation can be megger tested.
The term magnetic wire indicates a wire that has what for insulation?
Magnetic wire has a coating of varnish for an insulation.
What is the best test for testing battery cables?
Look at it. If the wire is corroded and/or the insulation is bulging, replace the cable.
What is the action of removing the insulation from wire?
The action of removing insulation for a wire is called stripping.
Why insulation is not required in winding wire side by side in motors?
Actually it is insulated, the red coating of varnish is the insulation. Also after a motor is wound, it is soaked in varnish and baked giving it added protection.
What is the high pod test?
A high pot test is a test of a wiring system for high potential (voltages). It's also called a megger test. This test verifies the integrity of a wire's insulation, and ensures that high voltages cannot escape through cracks in the insulation smaller than the human eye can see.
Electrical wire with clear insulation which wire is hot?
By "clear insulation," I assume you mean the type of wire used in some lamp cords. If so, the hot wire is the one with the smooth (non-ribbed) insulation.
Why and how does insulation depend on voltage?
Where you find wire insulation with ratings of 300 volts, 600 volts and 1000 volts, these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, insulation on a wire is tested to destruction. The label that is given to wire's insulation, as a result of the tests, is the highest safest voltages that can be applied to that particular wire. So when you see a wire that has a label stating that it is rated for 300 volts it means that any voltage under and up to 300 volts is safe to apply.
What is the color of insulation over an earth wire?
The insulation will be green in colour. Also bare copper can be used as a ground wire.
Does copper wire insulate?
The insulation on a wire is applied after the wire is drawn to size.
Is there a voltage carrying limit of wire?
Yes it depends on many variables such as what the wire is made of the size of the wire whether the wire is a multi strand wire. What governs the amount of voltage a wire can carry is the insulation that is wrapped around the wire. Like wire with ratings of 300 volts, 600 volts and 1000 volts these are the highest allowable voltages that can be applied. A wire that is rated for 300 volts is good for 120 volts, 240 volts and 277 volts. At test research facilities, insulation is tested to destruction. The label that is given to the wire insulation as a result of the tests is the highest safest voltages that can be applied to that particular type.
What is the outside of a wire called?
Insulation?
