0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the most common brand of volt meter?
Fluke is a very good and very popular test meter.
What is the best multi meter?
fluke
Where can one purchase a Fluke 337?
The Fluke 337 is a clamp meter. It can be purchased directly from Fluke. MCM Electronics is also an authorized dealer for Fluke products, as is MAT Electronics.
What is fluke meter?
A fluke meter measures Capacitance. It also measures frequency. They also have multi meters. Some are capable of measuring the capacitance and some are not. Usually the more expensive ones are capable of measuring capacitance.
How can a person test a circuit to determine if it is ac or dc?
Use a meter that simultaneously will test for both. Most better meters such as Fluke have this capability Or Switch your meter to AC if you get no voltage over the reading then likely you have a DC circuit. Don't do this by switching to DC first, You very well will ruin your meter if your meter does not have protection to handle this.
Where can one purchase a Fluke 123 meter?
A Fluke 123 meter can be purchased from many electrical stores, such as Farnell. Alternatively, one can purchase this item from webpages stores such as Amazon or Ebay.
Where can you purchase fluke test leads?
Fluke Test Leads can be purchased at online retailers including Grainger, Test Path, and TransCat. This product can also be purchased at Amazon and eBay.
Multification factor of digital energy meter with ct and pt connection?
Multiplication factor can be derived from Meter CT, Meter PT, Connected CT and Connected PT values.
How do you calculate multiplying factor in 3 phase 4 wire energy meter?
mf is ratio of CT ration of meter box to CT ration written on meter. ex: CT meter box: 30/5, Meter ct ration 1/1. MF : (30/5)/(1/1)= 6
What is LT CT meter?
long travelling and cross travelling meter
How do you check ct ratio test?
ct ratio test is the current between the primary to secondary
How do you calculate multiplying factor in 3 phase kwh meter using c.t. ratio is 2505VA 5 class 5.0?
multiplying factor = Line CT Ratio / Meter CT Ratio Usually it is mentioned on Meter that MF = 1 if CT Ratio is 200/5 or MF = 2 if CT Ratio is 400/5. There can be an additional multiplication factor that would be mentioned on the meter.
