turn the key , if it starts it works..
My Mazda 323 86 does the same, i think its a vaccuume hose missing. Otherwise oil filter, fuel filter, air filter, water in petrol tank. More but too varied question.
To change the starter clutch on an '86 Kawasaki Voyager 1200, first, remove the engine covers and drain the engine oil. Disconnect the starter motor and remove the flywheel using a puller. Replace the old starter clutch with the new one, ensuring it's properly aligned, then reassemble the flywheel and starter motor. Finally, refill the engine oil and test the starter to ensure proper operation.
what is a bfmr i know what a Mazda is...
The starter relay on an 86 Toyota Celica is used to provide power to the starter when the engine is cranked. It also prevents damage as a result of overheating or overdraw.
On the starter or IF you have (2) positive battery cables, in between them.
86% or B
between motor and catalytic
If it is like my '86 Samurai there is no starter relay. It uses a starter solenoid on the top of the starter to pass battery to starter motor when the solenoid is activated via the key switch.
Could be your starter.
66-86 ft-lb
No fluid in the master cylinder
Disconnect the - battery cable Raise and support vehicle Disconnect wiring at the top of starter Remove starter mounting bolts Remove starter