Need ti get in behind the dash and turn the base till it tightens
Another word meaning clenched is tighten.
The changing of flint is a fairly simple affair. You need a dime, the flint, and a piece of white paper. Placing the paper on a flat surface, put the lighter in an upright position. Grasp the body of the lighter in one hand and the casing in the other and pull. The lighter should come out of the case fairly easily. Turn the lighter over and locate the fibers at the bottom. Carefully pull the fiber from the wheel end and locate the screw. Use the dime to turn the screw and remove the tension spring. Shake the lighter to remove the old flint, then insert the new flint in the tube that the spring came from. Reinsert the spring, tighten the screw, replace the fiber, fill with fluid, and reinsert the lighter into the case.
Heat it with either a lighter or hair dryer and if you want put it on the top of your roof for like a day or two.
The clutch is hyraulic meaning there is no adjustment....If the pedal releases low replace the hydraulic unit If it's high you need a clutch You can't tighten the clutch you have to change it.
The cords that go through the eyelets on footwear. Used to tighten and tie up the footwear so it stays snug.
To tighten the steering you just tighten the nut under it and then your done. NICE
Bronchoconstriction or bronchospasm is the medical term that refers to the contraction of the smooth muscle in the walls of the bronchi and bronchioles that tighten and squeeze the airway shut.
take out the silver circle then it will tighten
just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt
Adjustable waists are commonly used on pants or skirts as a way to tighten or loosen the waist size. This is sometimes done by elastic, buttons, or clips.
you tighten it derrr!!
The past tense of "tighten" is "tightened."