you open the flap and SUCK IT!
how do you tighten fan belt on l200
peugeot 307 how to fit fan belt replacement
You can tighten a fan belt by tightening the tensioner pulley. Pry to the left on the tensioner pulley and tighten it.
how do you change a fan belt on a 406
how to fix belt for peugeot 207 diesel
To tighten the fan belt on a Renault Master, a person needs to adjust the belt tension wheel. This wheel has a bolt that is inserted in a groove. The bolt can be loosened and then moved to the desired location to tighten the belt.
theres no way to tighten it you will have to buy a new belt
first you have to locate the allready plced soket and then just tighten the belt
There is no fan belt on any year Fiero. Electric fan motor,
with the automatic belt tensioner..
If it is a serpentine belt you replace the tensioner pulley
Put your new fan belt around the pulleys of your 1992 Chevy Blazer. Tighten the fan belt with the tensioner pulley.
The fan is electric, not belt driven. The serpentine belt is has a spring loaded tensioner. If the belt is loose, the tensioner has failed.
fanbelt on a 306 hdi how do fit it
The belt has an automatic spring tensioner and can not be "tightened".
first u must loosen bolt on power steering belt tensioner till the belt will come off ,then loosen alternator bolts and push alternater till belt is loose enough,then take fan belt off ,install new fan belt,use crowbar on alternator to tighten fan belt,then put power steering belt back on and tighten tensioner till its at spec. then retighteh tensioner center bolt.
take it to a garage and get if fixed
you replace the spring tensioner or the belt because there are no adjustments.
check fuse for cooling fan, or possibly temperature sensor at inlet.
If it is a newer corsa (built in the last 12 years or so) if guessing you mean the alternator belt because it doesn't actually have a fan belt as the fan is driven by a electric motor. To tighten the alternator belt is very easy...Just loosen the two or three bolts holding it on (do not take them right out) pull the alternator so that the belt tightens and then tighten the bolts back up. You may need someone to hold the alternator and belt tight whilst you tighten the bolts back up. If the belt still continues to squeal after you have tightened it a couple of times it means the belt needs replacing.
Every 12000 miles or 2 years whichever is sooner, under firm thumb pressure there should be 5mm of movement midway along the longest run.
The fans are electric and do not have a belt The fans are electric and do not have a belt The fans are electric and do not have a belt