To tighten a loose drive belt, find the pully that is connected to the belt. Tighten the pully and then hold the belt in place using the adjuster belt. Check out the related video to see an example of how this is done.
I replaced an alternator on a 2002 Nissan Altima but the drive belt is now too loose even with it having an automatic belt tensioner
The drive belt is too loose. Tighten the belt. (but not too tight!)
Your air compressor drive belt is loose, Tighten it up! geterdone
There is no belt adjustment on a golf cart. However, if the belt is too loose, it may be a drive clutch problem, and an adjustment to the clutch can be made.
My belt is too loose, I have to tighten it.
Loose or worn A/C drive belt. Tighten or replace. If serpentine belt, replace.
You don't tighten a serpentine belt. The tension is controlled by a tensioner. If it is loose, then the belt has stretched and needs replacing.
You cannot tighten the belt. It has a tensioner that holds the proper tension. If the belt is loose then either the belt is worn out or the tensioner has failed.
By replacing the belt tensioner, this is a serpentine belt systems there is no adjusting the alternator bolt tighten the drive belts, if the belts are loose you must replace the belt tensioner and the belt to retain optimum performance from you Charging sytem as well as you other equipment being driven by the belt system.
You do not tighten a serpentine belt. It has a tensioner that keeps it at the correct tension. If it is loose, either the belt is worn and needs replacing or the tensioner is defective.
Loosen the tensioner pulley. Remove the old drive belt. Install the new drive belt. Tighten the new drive belt with the tensioner pulley.
tighten belt or replace it if it is glazed on contact surfaces