Very Carefully. With a long screwdriver. Wedge the alternator to apply tension to the belt with the screws loose. Still applying tension, tighten the bottom bolt first, and while still apllying tension, the top.
Watch out for Zombies while doing repairs at all times. You may not be able to spot them with your head deep in the car. Have a spotter working with you for your own safety.
Remember, They Know No Fear, No Pain, and No Mercy.
Remove the wiring harness from the back of your 1989 Toyota alternator. Remove the alternator retaining bolts. Remove the alternator belt. Reverse the process to install the new alternator.
well, considering that there is no 1989 Toyota tacoma, i wouldn't think so..if you're talking about a 1989 Toyota pickup, then no
The 1989 Toyota pickup had a curb weight that ranged from 2,565 pounds to 3,765 pounds. The '89 Toyota pickup was selected as Motor Trend's 'Truck of the Year.'
Yes
I give up, where?
10w-30
The fuse for the wipers on a 1989 Toyota pickup are located under the dash, near the hood release. It is in the main fuse panel which controls most of the vehicle's electronics.
the stock Toyota gear ratio is 4.11
It is located on the bottom of the windshield washer reservoir.
Gear oil, Best place to get it is at WALMART.
You add automatic transmission fluid to a 1989 V6 3.0 Toyota pickup truck through the filler tube in the engine compartment. This is also used to check the fluid level.
Not sure if 1991 and 1989 is sameNot sure if the alternator is under your right front seat on a 1989 model, but it is on 1991. You need to remove the seat and the top under the seat to get proper access. When that is done, it is easy removal of the alternator. You will see that the alternator is self explainable.