I don't know the year engine or model of your car!
However on a 1.9 Diesel next to the crankshaft pulley is a tensioning pulley find this and you will see two bolts one is an Allen key bolt loosen this using the correct size Allen key.
Then below the Allen key bolt is a square one use a square section key or a ratchet that fits you will notice that rotating this tightens or loosens the belt.
If you cannot tighten sufficiently just change the belt.
IN the Haines manual for that car.
Your local auto parts store would be able to get you an alternator belt diagram for a Peugeot 306 Rally 2-liter, 16-valve model without air conditioning. You can also find it at the library.
yes there is.
fanbelt on a 306 hdi how do fit it
Every 75k
best place to go to would be www.partsgateway.co.uk or there is a place i sued for my alternator in witham called Essex Motors on 01376 651648
Every 12000 miles or 2 years whichever is sooner, under firm thumb pressure there should be 5mm of movement midway along the longest run.
A cam belt or timing belt on a Peugeot 306 GTI only needs to be changed if it breaks or shows signs of wear. Changing the cam belt on a vehicle is not part of the regular maintenance. It only needs to be inspected once a year unless problems arise.
70,000 miles
The Peugeot 306 is manufactured by the French manufacturing company Peugeot. It was in production from 1993 to 2002 and was a replacement for the Peugeot 305.
WHAT ARE THE TAPPET SETTINGS FOR A PEUGEOT 306
The Peugeot 306 Estate is not an actual place. The Peugeot 306 Estate is a type of French car built by the manufacturer Peugeot. These cars are no longer being made, but still can be purchased used.