Want this question answered?
The correct hex/allen wrench to remove a Moen faucet handle (for the Renzo model faucet) is 7/64".
Moen part #1920 and a brand new Moen single handle faucet
The handle must be removed to allow access to the retainer clip, then the cartridge pulls out. You may need a cartridge puller if the faucet is old.
Turn the water off to the faucet. Remove the handle. The top of the faucet should unscrew to get to the ball valve. Replace the valve and gaskets then reassemble the faucet.
1/8 wrench for that one.
The inside part of a Moen faucet / shower body
I believe that is 5/32.
Shut the water supplies off, take the handle off, unscrew the cartridge. The washer will be on the bottom of the stem of the cartridge
The best place to purchase a moen faucet online is at the dealers website. It is www.moen.com. I'm sure you will find the perfect faucet for your bathroom.
No
What's the problem ?
we have had this faucet for a long time and I have done several repairs on it, because it has a lifetime warranty Moen sends us the parts and it is simple to repair. To remove the handle, carefully remove a small plug on the front of the handle, some have the Moen name on them and the one that we currently have is the same color as the faucet. You can remove them easily with a small knife or screwdriver, just make sure not to scratch the finish on the faucet. Under that plug you will find an screw that uses an Allen wrench (3/32), loosen it and the handle will come right off by lifting up on it. To get to the rest of the faucet just lift the dome and the cartridge is ready to remove with a wrench. Don't remove the cartridge without turning off your water source!