The nylon bushing at the bottom of the shifter is worn out. remove console. put shifter in the neutral position, unbolt shifter from transmission. replace bushing, then reinstall.
good luck...
The 2004 Mazda MAZDA6 has a 5-speed manual.
The 2004 Mazda MAZDA3 has a 5-speed manual.
www.promanuals.com/serviceparts/2004-mazda-b4000-truck-owners-manual-automated-download
The 2004 Mazda MX-5-Miata has a 5-speed manual.
how do i reset an airbag light on 2004 mazda premacy
Internet, want ads, auto shows.
your owners manual has explicit instructions. google the manual if you lost yours
I have a 2004 blazer and my manual shifter is removed by turning the hex nut just below the actual shifter clockwise. This may sound counter-intuitive as that is the direction to tighten but this spins the nut away from the shifter so the shifter is free to spin (counter-clockwise). So.... 1. Push boot around shifter down toward floorboard to expose shaft/nut coming out of tranny/gearbox 2. Turn nut clockwise to get away from shifter ( i used a small crescent ) i used a combo of 1st gear and reverse to get the right angles to fit wrench in. 3. Turn by hand the shifter (counter-clockwise) to remove. Or use pipe wrench with cloth around shifter to start the motion if stuck. Use a thick cloth to not scratch paint. 4. Nut and shifter are both free now. 5. This is also how you adjust the height of your shifter if you wish. Hope this helps
Take it to your local bike shop
more infooops sorry, this is for a 2004 Mazda 6s w/ sport package
Yes, a 2004 Mazda 6 can be converted from an automatic transmission to a manual transmission. However, it is very time consuming and will cost a lot of money to do this.
shifter rod gear linkage