0
there should be an adjustment on the back of your sway arms to move the axle back
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How tighted a chain on hona three wheeler?
To tighten the chain on a Honda 3 wheeler, first loosen the rear axle bolts then turn the adjuster nuts clockwise to tighten. Finish by tightening the rear axle bolts.
How do you tighten a suzuki 50cc four wheeler chain?
with a spanner
how do you tighten the chain on a 300 ext four wheeler?
To tighten the chain on this model four wheeler, one must first loosen four bolts located on the swing arm axle. Then rotate the chain counterclockwise, and tighten those bolts back down.
How do you tighten the chain of a 4 wheeler?
loosen the clamp bolts on the adjuster assy and rotate the whole axel using a pipe wrench, when your chain is properly set re tighten clamp bolts.
Where do you tighten the chain on a 200X 3 wheeler?
In the back of it there is an bold by the bottum of your axel you tighten that up then up on top on the right side there is a big bolt u loosen that a little then go back down to the bottom and tighten the bold up and oce it is tight i tighten up you bolt on top
How do you tighten on a zongshen 150cc 4-wheeler chain?
ive been having the same problem with mine.... but there is 2 pins that stick out on the left and the right of the chain you should be able to tighten them..... if not just weld it on there like i did after you do that it should go fine
How do you tighten a chain ATV 150?
how do you tighten a chain on a 150 ATV
How do you tighten chain on polaris 500 predator?
How do you tighten chain on polaris predator 500?
How do you tighten a chain on a 2006 polaris sportsman 6x6?
how to tighten the front chain axle
How do you tighten up a chain on a 185 Honda 3 wheeler?
This is how you tighten a loose cam chain. On the honda 185s three wheelers there is a cam chain tensioner on the motor. First you need a 14mm wrench and a 10mm wrench and a screw with a fine thread now to get started you take the rubber boot off. Then you take the 10mm bolt off you put the fine thread screw in the hole. Then you start the motor up and loosin the 14mm locking nut while you do that you push down and lift up on the screw but hold the screw up and then tighten the locking nut and you should have the cam chain tightened.
How do you tighten chain on 1994 kawasaki ninja zx11?
How do you tighten chain on 1995 kawasaki ninja zx6r
How do you tighten a chain on ATV?
you shorten the chain links
