Most Jimmys use a spring loaded belt tensioner that is not adjustable. NOTE: It is normal for belt tensioner to "bounce" a little bit when engine is running. If your belt is squeaking here are a couple things you can do. Replace the belt with a QUALITY belt. Don't buy the cheap belts on vehicles with long serpentine belts. They will squeak. I recommend Garorback belts. If your belt is still squeaking ensure that all pulleys and belt driven items are working properly by rotating and checking them with the belt off. Most GM vehicles have an idler pulley. It is very common for the bearing on it to go bad. If you still have a squeak then replace the tensioner assembly. They are readilly availably at parts stores.
How do you tighten the serpentine belt on an oldsmobile ciera
You don't tighten a serpentine belt. The tension is controlled by a tensioner. If it is loose, then the belt has stretched and needs replacing.
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
Most serpentine belt systems have a self adjusting tensioner.
You do not tighten a serpentine belt. It has a tensioner that keeps it at the correct tension. If it is loose, either the belt is worn and needs replacing or the tensioner is defective.
You can tighten the serpentine belt on your 2005 Chrysler 300 by tightening the tensioner pulley. Push the tensioner pulley to the right until the serpentine belt is tight.
the Serpentine Belt on the 91 Lebaron is on Tension Pulley, you dont tighten it. But if it is loose and you need to tighten it you just go and buy a new belt and put that on.
Serpentine belt? You may have to remove to tighten alternator
usually serpentine belts get their tension(tightness) from the belt tensioner
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
Loosen the tensioner pulley. The serpentine belt will become loose and can be removed. Put the new serpentine belt on and tighten the tensioner pulley.
Tighten it.