It has to be reset with a code reader that plugs into computers diagnostic port. It can also retrieve whatever codes have been set to help you find what the problem is. If you reset without a repair, it will come on again after fault occurs 2x or 25 mi. You may be able to reset by pulling batt cable for 1/2 hr, but won't pass smog and light will come back on again.
You can not disconnect the check engine light.
it means you need to check the engine
A flashing check engine light is an indication of a severe engine misfire.
Auto Zone will check your engine light for free... Write down the codes and go from there.
According to the 2000 Ford Explorer Owner Guide : No , a separate fuse for the check engine light is not listed
The check engine light is a " picture " of an engine , just to the left of the engine temperature gauge
a 2000 dodge ram 1500 the check engine light is on and the code says torque converter and clutch and overdrive solenoid. what do you think that the problem is?
With a scan tool.
With a scan tool.
Check the oxygen detector.
A flashing check engine light normally means you have a misfire.
you need a scanner