0
take key out of ignition and then press and hold the mileage reset button then insert key and turn on ignition whilst still holding the button down till lights on dash come on then hold till "insp" light comes on then light will reset it self. also these instructions are in the drivers handbook
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
HOW TO Reset service light on corsa 07 plate?
To reset Corsa D 57 plate do the following, put your foot on the brake pedal then press and hold the odometer button in. Wait until Insp 0 comes on the display, then switch on the ignition wait a few seconds. Now it should display Insp 19000 (depending on service interval). Release button and brake pedal, now switch off ignition. Next time you turn on ignition the Insp 0 should no longer show on the display. This did work for me.
Reset the service indicator lamp on opel combo?
with the switch off, press and hold the odometer button. Turn the switch on, and the odometer will be in insp mode. mode. Press the odometer button until the indicator shows --- . Turn the switch off and the lamp should be reset.
How do you turn off the maintenance light on a 2006 Toyota Tundra?
Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash!!!!!!
How do you reset inspection2 symbol on astra?
foot on brake , hold trip reset in and turn on ignition after 10 seconds insp will reset then you can release all!
How do you dim the dashboard light display in a 2009 corolla?
Turn the nob on the right side of the odometer.
How do you reset 05 reg astra inspection warning?
hold down mileage reset button and turn on ignition until insp turns to four dashes
How do you reset maintenance required light on 2009 Toyota tacoma?
With odometer reading selected (not trip A or B) turn key to LOCK and remove key (not sure if this is necessary) insert key, hold down odometer button while you turn key to ON position. Continue to hold down odometer button. Odometer display will show ------ then blank, your Maintenance Required light will turn off and your old odometer reading will return.
How do you reset the maintenance gauge on the S320 1999 model?
Turn key to position 1. Make sure main odometer and trip odometer are displayed. Press up or down arrows on steering wheel to show FSS (flex service) on display. Turn key to on position and press trip odometer reset (R) for 2 seconds. Display will ask if you want to reset FSS. Confirm by holding reset until display shows FSS reset.
How do you change the language display on a 2004 Chevy Tahoe?
Turn on ignition Make sure the odometer is displaying miles Hold down the odometer reset button until the display starts cycling through the language options - English French Spanish. When the display shows the desired language, release the button.
How do you reset periodic inspection light?
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
Service reset mark 4 golf?
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
How do you reset the service indicator on a Transporter?
To reset a T4 Service indicator. With ign off, press and hold trip mtr butto. Switch ign on and release the button. If only "insp"is in the display, turn minutes knob to right on the clock, "service ----" should now appear in the display. Turn off ign and service is reset. If "insp and Oil" are shown in the display, get to insp by toggling the trip mtr button. follow above procedure, but don't yet turn off the ign, press the trip mtr button again and "oil" should appear, again turn the minutes knob to the right and "service----" will appear. Turn ign off and service is reset. Works for me on my 2000 T4.
