Want this question answered?
To reset the maintenance light ,make sure you have the odometer displayed.1-Turn the vehicle off2- Push the button that toggles between odometer and trip, and keep holding it down3-Now turn on the ignition, while your still holding the button down4-The display should blink, the maintenance light will go out
1. Set your ODO to Trip A 2. Turn off ignition 3. Hold ODO button 4. Turn on ignition 5. Hold ODO button until Maintenance Required light stops flashing
How do you turn the maintenance light off 2006 Volvo s60 How do you turn the maintenance light off 2006 Volvo s60 Turn key to position I hold trip reset button and turn key to position II continue holding the trip button for about 4 seconds there will be a yellow triangle flashing in the dash, if it turns red you held the reset button to long.
It means its time for an oil change. Can be reset by pushing the trip button until its on ODO. then hold the trip button, turn off the car and turn key to the on position without starting the car, then releasing the trip button. should reset from there.
How do you turn off the check engine light off and the tire pressure light off the air bag light off
You get what ever is causing it to be illuminated repaired and then clear the associated codes
Hold in the odometer knob (the one that you use to track your mileage) while you turn the key on then off and back on again, and the light should go off.
it's in the manual for my 2007- has you go to the trip odometer for trip A and hold the button in as you turn the key.
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD
The maintenance required light only goes on after 7,500 miles since last 'maintenance'. The maintence required light will not turn off by replacing or changing anything, the only way to turn it off is by putting your key in the key slot next to the light.
t's not a problem, it is merely a reminder light so customers will be prompted to do the required maintenance. Turn the ignition ON Make sure the "ODO" is displayed, not "TRIP" Press and hold the TRIP reset button Turn the key off and back on Hold the reset button until the lines on the ODO display disappear and the ODOMETER reading comes back. answered by Liselle
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros or dashes begin to appear. Once that stops, your maintenance light will be reset.