Go to the alarm mode (AL on screen) and press the upper right button. This should turn off all alarms. Continue to press the upper right button to switch between the alarms, being sure to remain in the alarm mode.
If you have the same watch as me which is a green cardinal watch with the words Sport Nite Lite then the answer is 1.while looking at the current time press and hold rst/spl, as you are holding this press st/stp. You will notice a little bell near the top right which indicates that the hour chime is on as well as the alarm indicator. Press st/stp a couple of times while holding rst/spl until those turn off. Good luck.
press the D button to select which alarm you want to disable then look on the face of the watch between roughly where the 1 and 2 would be on a normal display and you will see a tiny grid. Use the B button to toggle through - the options are snooze, alarm, signal (hourly bleep) or nothing - a magnifying glass may help you
Push and hold the lower Right button labeled (Lap/Reset) this should display your alarm time. Next Press and release the Start/ Stop button. You will hear a beep and the black circle indicating an alarm will disappear and the alarm is off.
press the start and the reset button at the same time
Press the reset button, and the st/stp button at the same time
on the AW60447W you need to press and hold the lap/reset button and while holding the lap/reset button press the start/stop button. My question is how do you turn off the hourly beep.......
Press the start and the reset button at the same time. This turns 0ff/on once set
How Do I Turn off Alarm on Athletic Works Watch ATHM4885
Hold the reset button when your on the regular time mode, and press mode to turn off alarm. You should see the days of the week disappear.
I don't think you can turn off the video watch. It can sleep, but it wastes a lot of power.
First off, do not buy no name watches. They are always cheap knock offs and you normally don't get the functionality from them that you should get. With that being said, you should NEVER set the alarm. If by some strange chance the alarm was set when it left the kid sweat shop then that's a sign the kids are acting up. On my no-name watch... Hold button #2 (mode) down, wait a few seconds, then depress button #4 (reset) , then depress button #3 (stop-start) to turn chime/alarm off. To turn chime/alarm on again depress #2 (mode) , wait a few seconds, while continuing to hold down #2 , depress #4 button ...turns chime on . More power to the sweatshop kids i say..i luv the watches!
Depends on the Baby G Model. On my wife's, there is a letter readout above the time (in a separate display really on the watch face) that tells the day of the week in normal watch mode. Push "Mode" (lower left side) until this display reads "AL" which indicates you are in alarm mode. Then use the alarm on/off button (upper right) to turn it off (there is a round circle on the right side of the display that shows when "AL" is on (indicated by a black dot) or off (lack of a black dot.) Your model number is a three or four digital code (it should be the only one which is in inscribed in an inscribed box. No letters.) That will get you the manual. Read it! :) -------Other answer provided by another user-------- OMG! It does not say in the instructions how to turn the alarm on or off but someone answered it on another website: push the 2 buttons on the right at the same time! After my husband and I spent an hour or so, each, this was so funny! It worked! Yay! No more waking up at 4:11 am! The analogue digital baby g is more difficult to switch off. get to the alarm setting by pressing the mode button (bottom left) Then press the mode and the advance buttons at the same time (the two bottom buttons.) You will see that in the bottom window shaded third of a circle will move from alm (alarm) to sig. if you press it again it will go to dst. I don't know what they stand for but that should solve the problem.
To turn off the alarm on the Casio Illuminator watch, first click the mode button three times and hold the adjust button so that you are given the option to change. Use the mode button to change the minute, seconds or hours. The time memo button will make the time go down. The receive button will make the time go up. Click adjust to set and the memo button to turn it on or off. In the top right corner, it will tell you if the alarm is on or off.
To turn off the alarm you hold down 'Reset' and press 'Start' Hope this helps!
How Do I Turn off Alarm on Athletic Works Watch ATHM4885
Turn off the alarm by pressing the upper and lower buttons on the right side of the watch while it is in time mode.
To turn the alarm off once it has started ringing you can push the left button on the bottom of the watch. If you are trying to set the alarm so it does not ring at all, I cannot help - I need that infomration.
to set a alarm you just press the ''MODE'' buttion
press the b & d buttons
Hold down reset, then press start, the alarm bell symbol should dissappear.
let it charge up in light. It will turn on when it is charged.
Put the key in the drivers door lock and turn it to unlock - it will turn alarm off while sounding OR will turn alarm off as well as unlock door - just watch the red alarm light flashing it will go out.
To turn off the alarm. Press the Start/Stop and Lap/Reset buttons at the same time (on my Body Gear watch, these two buttons are one the right-hand side of the watch). You will hear a beep and the alarm icon will no longer be displayed.
The best way I think is to press these 2 buttons. Start and reset.