0
1. Turn the ignition key to the 'Lock" position with the odometer (total mileage) reading showing.
2. Turn the ignition key to the "On" position while holding down the trip meter reset knob/button.
Hold down the knob for at least 5 seconds. The odometer will indicate "000000" and the light will go off.
If the system fails to reset, the light will continue flashing.
Note: This procedure is in the 2005 Highlander owners manual under the section entitled "Operation of Instruments and Controls (Section 1-6) and is not limited to the Highlander but may apply to other Toyota models and model years as well.
What else can I help you with?
How do you reset the maintenance required light on a 2009 Highlander Toyota?
To reset the maintenance required light on a 2009 Toyota Highlander, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. If it doesn’t reset, repeat the process to ensure it was done correctly.
How does vsc light turn off on 2005 highlander?
How does vsc light turn off on 2005 highlander?
How do you reset maintenance required light on a 2009 Toyota Highlander?
To reset the maintenance required light on a 2009 Toyota Highlander, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the light should turn off, indicating the reset is successful. If it doesn’t turn off, repeat the process to ensure it has been done correctly.
How do you turn off the maintenance required light on Toyota highlander 6 cylinder 2004?
Read the owners manual. It has step-by-step instructions.
How do you reset the maintenance required light in the 2006 Toyota Highlander?
I just reset the "maintenance required" light on my 2006 Highlander. This is what I did. (1) Turn the ignition key to ON. (2) Press the odometer button until you see the TOTAL MILAGE displayed. (3) Turn the key to OFF. (4) While HOLDING DOWN the odometer button, turn the key to ON and KEEP HOLDIN DOWN the button and you will see 5 dashes blink off one by one. (5) When all the dashes have blinked off, turn the key to OFF and you are done.
How do you turn off the general maintenance light on a 2005 Toyota highlander?
1. Turn the ignition key to the 'Lock" position with the odometer (total mileage) reading showing. 2. Turn the ignition key to the "On" position while holding down the trip meter reset knob/button. Hold down the knob for at least 5 seconds. The odometer will indicate "000000" and the light will go off. If the system fails to reset, the light will continue flashing. Note: This procedure is in the 2005 Highlander owners manual under the section entitled "Operation of instruments and Controls (Section 1-6) and is not limited to the Highlander but may apply to other Toyota models and model years as well.
How do you turn off maintenance required light for 2008 highlander?
With the car key on ACC, put your odometer on the mileage setting (not 'trip') then turn the key off - then, while holding down the button that switches from odo and trip, turn the key back on to ACC - you will notice the maintenance light blink and then go out. The vehicle computer automatically resets the mileage interval until it goes on again.
How do you reset the Maintenance required light in a 2005 Toyota Highlander?
Turn key on. Set odometer to odo not trip a or b. Turn key off. Press and hold trip setter. With trip setter still held turn key on, continue to hold trip setter for 5 seconds. Reset Main req light after an oil change. **Nope, doesn't work, just tried it on 09 highlander.
How do you turn off the 'maintenance required' light on a 2002 Honda Accord EX V6 4 door?
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD
How do you turn of the Maintenance Required Light on a 2000 Honda Civic Ex?
The maintenance required light only goes on after 7,500 miles since last 'maintenance'. The maintence required light will not turn off by replacing or changing anything, the only way to turn it off is by putting your key in the key slot next to the light.
How do you turn off the engine needs attention light on a Highlander 2004?
That info can be found in the owners manual.
How do you turn off Lexus GS350 Maintenance Light?
To turn off the maintenance light on a Lexus GS350, first, turn the ignition to the "ON" position without starting the engine. Next, press the gas pedal three times within five seconds. Finally, turn the ignition off, and when you restart the vehicle, the maintenance light should be reset. If the light remains on, you may need to check for any ongoing maintenance issues.
