How does vsc light turn off on 2005 highlander?
That info can be found in the owners manual.
1. Turn the ignition key to the 'Lock" position with the odometer (total mileage) reading showing. 2. Turn the ignition key to the "On" position while holding down the trip meter reset knob/button. Hold down the knob for at least 5 seconds. The odometer will indicate "000000" and the light will go off. If the system fails to reset, the light will continue flashing. Note: This procedure is in the 2005 Highlander owners manual under the section entitled "Operation of instruments and Controls (Section 1-6) and is not limited to the Highlander but may apply to other Toyota models and model years as well.
Turn key on. Set odometer to odo not trip a or b. Turn key off. Press and hold trip setter. With trip setter still held turn key on, continue to hold trip setter for 5 seconds. Reset Main req light after an oil change. **Nope, doesn't work, just tried it on 09 highlander.
i have engine light staying on in my 2005 toyota yaris how do i turn off the light
To reset the maintenance required light on a 2009 Toyota Highlander, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the light should turn off, indicating the reset is successful. If it doesn’t turn off, repeat the process to ensure it has been done correctly.
To turn off the airbag light you need to give a firm, well placed punch to the person nearest to you.
1. Turn the ignition key to the 'Lock" position with the odometer (total mileage) reading showing. 2. Turn the ignition key to the "On" position while holding down the trip meter reset knob/button. Hold down the knob for at least 5 seconds. The odometer will indicate "000000" and the light will go off. If the system fails to reset, the light will continue flashing. Note: This procedure is in the 2005 Highlander owners manual under the section entitled "Operation of Instruments and Controls (Section 1-6) and is not limited to the Highlander but may apply to other Toyota models and model years as well.
Read the owners manual. It has step-by-step instructions.
To turn off the VCS (Vehicle Stability Control) light on a 2007 Toyota Highlander, locate the VSC button on the dashboard, usually near the gear shift or on the instrument panel. Press and hold the button for a few seconds until the indicator light turns off. If the light remains on, it may indicate an underlying issue with the vehicle's stability control system, and a diagnostic check may be necessary.
I just reset the "maintenance required" light on my 2006 Highlander. This is what I did. (1) Turn the ignition key to ON. (2) Press the odometer button until you see the TOTAL MILAGE displayed. (3) Turn the key to OFF. (4) While HOLDING DOWN the odometer button, turn the key to ON and KEEP HOLDIN DOWN the button and you will see 5 dashes blink off one by one. (5) When all the dashes have blinked off, turn the key to OFF and you are done.
1. you can get it fixed 2.Break the light.
it comes on and off randomly