To turn off the maintenance light in a 2007 Volvo S60, first, turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After doing this, the maintenance light should reset and turn off. If it remains on, you may need to check for any underlying issues or consult the owner's manual.
How do you turn the maintenance light off 2006 Volvo s60 How do you turn the maintenance light off 2006 Volvo s60 Turn key to position I hold trip reset button and turn key to position II continue holding the trip button for about 4 seconds there will be a yellow triangle flashing in the dash, if it turns red you held the reset button to long.
To reset the regular maintenance required light on a 2007 Volvo XC90, turn the ignition to the "ON" position without starting the engine. Press and hold the trip odometer reset button (located on the instrument cluster) until the display shows "Resetting" or "Service Reset." Release the button, and the maintenance light should turn off. Finally, turn off the ignition and start the vehicle to ensure the reset was successful.
To reset the maintenance light on a 2009 Volvo S80, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you start the car again, the maintenance light should be reset. If it remains on, repeat the process to ensure it is properly reset.
To clear the maintenance light on a 2006 Volvo S80, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it persists, it may require a diagnostic tool or further inspection.
To reset the maintenance light on a 2004 Volvo S60, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you restart the car, the maintenance light should be reset. If the light remains on, repeat the process to ensure it was done correctly.
To turn off the maintenance light on a 2007 Toyota Camry, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, turn the ignition off and then back to the "ON" position to confirm that the maintenance light has been reset.
To reset the maintenance service light on a Volvo S80 after an oil change, turn the ignition key to the "II" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it remains, repeat the process to ensure it's completed correctly.
To reset the maintenance reminder on a 2007 Mercedes SLK 280, turn the ignition key to position 1 (do not start the engine). Press the gas pedal three times within 10 seconds. Then, turn the ignition off and back on to confirm that the maintenance reminder light has been reset. If the light does not turn off, repeat the process.
To reset the maintenance light on a 2002 Volvo V40, start by turning the ignition key to the "II" position without starting the engine. Press and hold the trip odometer reset button on the dashboard. While holding the button, turn the ignition off and then back to the "II" position again. Release the button, and the maintenance light should be reset.
It is on a timer; just give 10 minutes or so, and it will shut off.
To turn off the maintenance required light on a 2007 FJ Cruiser, start by turning the ignition key to the "ON" position without starting the engine. Press the trip meter reset button until the trip meter displays "Odo." Then, while still holding the reset button, turn the ignition off and then back to "ON." Release the button, and the maintenance light should turn off.
Turn igniton to on position and put odometer in trip mode, turn off ignition. Hold trip button in and hold it in as you turn ignition to on position, it will flash Turn off ignition. Maintenance light should go and stay off