How do you turn the maintenance light off 2006 Volvo s60 How do you turn the maintenance light off 2006 Volvo s60 Turn key to position I hold trip reset button and turn key to position II continue holding the trip button for about 4 seconds there will be a yellow triangle flashing in the dash, if it turns red you held the reset button to long.
You get what ever is causing it to be illuminated repaired and then clear the associated codes
To reset the maintenance message on a 2006 Volvo V70, turn the ignition key to the "II" position (just before starting the engine). Press and hold the trip odometer reset button on the dashboard, then turn the ignition off. While keeping the button pressed, turn the ignition back to the "II" position again until the maintenance message disappears, then release the button. The maintenance light should now be reset.
The 2006 Volvo S60 has 20 valves.
The 2006 Volvo XC70 has 20 valves.
The 2006 Volvo C70 has 20 valves.
The 2006 Volvo S80 has 20 valves.
The 2006 Volvo XC90 has 20 valves.
To reset the maintenance light on a 2006 CLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on, and the maintenance light should be reset. If it doesn’t turn off, repeat the steps.
To reset the maintenance light on a 2006 Mercedes SLK, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the maintenance light has been reset. If the light remains on, repeat the steps.
The 2006 Volvo XC90 is a gas-powered vehicle.
The 2006 Volvo C70 has an inline 5 engine.