You get what ever is causing it to be illuminated repaired and then clear the associated codes
see you tube...theres a fix on there
It means it's time to change your oil.
To turn off the maintenance required light on a 2006 Honda Element, first, turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After this, the maintenance light should reset and turn off. If it doesn't, check if the vehicle requires any actual maintenance or consult the owner's manual for further troubleshooting.
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
Press the "step" button until "0 miles to service" is displayed. Hold "reset" until it resets.
This will be in your owners manual. You can also see the related question linked to the right for the 2005.
You need a special computer for that. Check the gas cap first, make sure its tight, sometimes that sets it off.
Your 2006 Toyota Tacoma has a chain and not a belt. No maintenance is required.
Your 2006 Toyota Tacoma has a chain and not a belt. No maintenance is required.
Press and hold the odometer reset button in while turning on the ignition switch without starting the car, after 5 seconds the light will go off.
Every vehicle manufacturer has their own idea of how the computer should be set up. You'll have to get the owners manual and look up "maintenance light" in the back of the book.
Take your car to checker auto parts, they have a new diagnostic system that you plug in and can cancle out any warning lights. The best part is that it is free.