0
To reset the maintenance message on a 2006 Volvo V70, turn the ignition key to the "II" position (just before starting the engine). Press and hold the trip odometer reset button on the dashboard, then turn the ignition off. While keeping the button pressed, turn the ignition back to the "II" position again until the maintenance message disappears, then release the button. The maintenance light should now be reset.
What else can I help you with?
How do you reset the maintenance required message in a 2006 Acura TSX?
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
How do you turn off scheduled maintenance light Volvo s60?
How do you turn the maintenance light off 2006 Volvo s60 How do you turn the maintenance light off 2006 Volvo s60 Turn key to position I hold trip reset button and turn key to position II continue holding the trip button for about 4 seconds there will be a yellow triangle flashing in the dash, if it turns red you held the reset button to long.
How do you reset the maintenance message on a 2006 infiniti m45?
To reset the maintenance message on a 2006 Infiniti M45, start by turning the ignition key to the "On" position without starting the engine. Next, press the accelerator and brake pedals simultaneously and hold them down for about 10 seconds. After that, the maintenance light should blink and then turn off, indicating that the reset is complete. Finally, release the pedals and turn off the ignition.
How do you reset maintenance service indicator on a 2006 Mercedes E350?
How do you reset maintenance service indicator on a 2006 Mercedes E350
How do you clear maintenance light 2006 Volvo S80?
To clear the maintenance light on a 2006 Volvo S80, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it persists, it may require a diagnostic tool or further inspection.
How do you reset maintenance light for 2006 solara?
To reset the maintenance light on a 2006 Toyota Solara, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine; the maintenance light should be reset. If it remains on, repeat the process.
How do you reset the maintenance light on a 2006 clk 350?
To reset the maintenance light on a 2006 CLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on, and the maintenance light should be reset. If it doesn’t turn off, repeat the steps.
How do you reset the maintenance on a 2006 Mercedes slk?
To reset the maintenance light on a 2006 Mercedes SLK, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the maintenance light has been reset. If the light remains on, repeat the steps.
How do you reset service maintenance indiator on 2006 slk 200 Mercedes?
To reset the service maintenance indicator on a 2006 Mercedes-Benz SLK 200, turn the ignition key to position "2" (without starting the engine). Press the gas pedal three times within ten seconds. Then, turn the ignition off and start the engine to verify that the maintenance indicator has been reset.
How do you reset the service light on a Mercedes 2006 280?
Go to http://www.startekinfo.com/StarTek/ and select MB Workshop Resources, you will find a wealth of information on Mercedes as well as a pdf file on resetting the maintenance service indicator message
How do you reset the oil change required message on a 2006 ford explorer?
To reset the oil change required message on a 2006 Ford Explorer, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. The message should disappear, indicating that the oil change reminder has been reset. Finally, turn off the ignition and then start the engine to confirm the reset.
How do you reset maintenance required light on 2006 honda cr-v?
see you tube...theres a fix on there
