To reset the maintenance light on a 2006 Toyota Solara, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine; the maintenance light should be reset. If it remains on, repeat the process.
Make sure odometer (ODO) is slelected (not trip odometer). Hold in odometer "reset" botton. Turn Igniotion to ON but do not start engine. Light will flash and go off. Turn Ignition OFF. Release "reset" button.
To reset the maintenance light on a 2006 CLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on, and the maintenance light should be reset. If it doesn’t turn off, repeat the steps.
To reset the maintenance light on a 2006 Mercedes SLK, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the maintenance light has been reset. If the light remains on, repeat the steps.
To reset the maintenance light on a 2006 Toyota Prius, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it remains on, repeat the steps to ensure the process was completed correctly.
How do you reset maintenance service indicator on a 2006 Mercedes E350
see you tube...theres a fix on there
Try disconnecting the battery for 5 minutes. If that does not work you will need an OBD2 scanner to reset it. Of course if you do not fix the problem that triggered the check engine light it will just come back on.
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
You do not reset it, it is a fault code. It is not a routine maintenance indicator. Fix the problem and the light will go out.
How do you turn off the check engine light off and the tire pressure light off the air bag light off
Press the "step" button until "0 miles to service" is displayed. Hold "reset" until it resets.
Press the odometer reset button while at the same time turning the ignition to the on position without starting the engine. After 5 seconds the light will reset.