To reset the maintenance message on a 2006 Infiniti M45, start by turning the ignition key to the "On" position without starting the engine. Next, press the accelerator and brake pedals simultaneously and hold them down for about 10 seconds. After that, the maintenance light should blink and then turn off, indicating that the reset is complete. Finally, release the pedals and turn off the ignition.
To reset the maintenance message on a 2006 Volvo V70, turn the ignition key to the "II" position (just before starting the engine). Press and hold the trip odometer reset button on the dashboard, then turn the ignition off. While keeping the button pressed, turn the ignition back to the "II" position again until the maintenance message disappears, then release the button. The maintenance light should now be reset.
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
How do you reset maintenance service indicator on a 2006 Mercedes E350
Call Infinity service
To reset the maintenance light on a 2006 CLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on, and the maintenance light should be reset. If it doesn’t turn off, repeat the steps.
To reset the maintenance light on a 2006 Mercedes SLK, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the maintenance light has been reset. If the light remains on, repeat the steps.
To reset the service maintenance indicator on a 2006 Mercedes-Benz SLK 200, turn the ignition key to position "2" (without starting the engine). Press the gas pedal three times within ten seconds. Then, turn the ignition off and start the engine to verify that the maintenance indicator has been reset.
Go to http://www.startekinfo.com/StarTek/ and select MB Workshop Resources, you will find a wealth of information on Mercedes as well as a pdf file on resetting the maintenance service indicator message
see you tube...theres a fix on there
To reset the maintenance light on a 2006 Toyota Prius, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it remains on, repeat the steps to ensure the process was completed correctly.
To reset the maintenance warning on a 2006 Mercedes-Benz SLK 280, turn the ignition key to position two without starting the engine. Press the gas pedal three times within five seconds, then turn off the ignition. When you restart the car, the maintenance warning light should be reset. If the warning persists, repeat the process.
You will find that info in the drivers manual.