Go to http://www.startekinfo.com/StarTek/ and select MB Workshop Resources, you will find a wealth of information on Mercedes as well as a pdf file on resetting the maintenance service indicator message
How do you reset maintenance service indicator on a 2006 Mercedes E350
To reset the service light on a 2006 Mercedes Benz ML320, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and start the engine to ensure the service light is cleared. If the light remains, you may need to repeat the process.
you close the door. wait for the dome light to shut off. then turn the key on push the "o" button twice. themn turn off the key. then push and hold the "o" button while turning the key back on. keep holding the button for about ten seconds and then it will beep and reset the service light.
If you have fixed the problem it should reset itself. If not, the light will stay on.
You'll need to use a scan tool or other OBDII software to reset your service lights.
To reset the service light on a 2006 Mitsubishi L200, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After that, turn the ignition off and then start the engine to ensure the service light has reset. If the light remains on, repeat the process to confirm.
To reset the service engine soon light on a 2006 Mercury Mountaineer, you can buy a scan tool. Make sure you note down the numbers before scanning.
Buy the oxygen sensor and fix the car and get the light reset !
To reset the service light on a 2006 Porsche Boxster, turn the ignition on without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you restart the vehicle, the service light should be reset. If the light remains on, you may need to repeat the process or consult a professional.
You will need to take the 2006 Audi A6 to a mechanic to have the service light properly reset. In some cases, a person can undo the battery to reset the light.
what is the "E service" for a 2006 mercedes benz E350
To reset the service maintenance indicator on a 2006 Mercedes-Benz SLK 200, turn the ignition key to position "2" (without starting the engine). Press the gas pedal three times within ten seconds. Then, turn the ignition off and start the engine to verify that the maintenance indicator has been reset.