To reset the service light on a 2006 Mitsubishi L200, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After that, turn the ignition off and then start the engine to ensure the service light has reset. If the light remains on, repeat the process to confirm.
Most OBD2 code scanners give you the option of clearing the code and resetting the MIL.However, if the problem still exists the light will come back on.Repair the problem and the computer should reset the light.
Have vehicle scanned to have codes cleared
odometer button
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
It is the body control module It always starts out sparadic then you will get a service engine soon light and a service light !!
If the sensor is functioning properly, when you add the washer fluid the light should turn off automatically; no additional action required.
I am guessing they mean Oil change reset button. If so. There is a reset button in the fuse box in the engine compartment. Turn your key half way, open the fuse box, press and hold the button for 15 seconds, look at your dash. If the light is flashing you have reset the oil life indicator.
A Mitsubishi L200 yellow warning light on the dash could mean the ABS is having issues. It is best to check the owner manual for defined warning light meanings.
The diagram for the air conditioning on a Saturn L200 is located in the service manual. It outlines the location of each component and how they are connected together.
Were is the body control module located on 02 Saturn L 200
Could be alarm...
You can program the keyless entry remote, for your 2001 Saturn L200, by holding the unlock and lock weapons at the same time. The red light will flash on and off. The remote will be programmed when the red light stays illuminated.