Want this question answered?
smash the clocks out with a hammer
to get the spanner (or service me now) light off all you have to do is turn the ignition on while the engine is off and hold in the trip meter reset button for six seconds or so.
Take the fuse out.
igntion off. press and hold down on the button on the dash. turn ignition on. and wait for the spanner to disappear. turn igntion off. don't be alarmed if the trip meter resets cos it will go back to normal when the spanner light is removed from the dash.
turn ignition to position 2..press brake and throttle together for 15 seconds..light will flash..release and switch off...done!
with ignition off hold done the button on the instrument cluster. turn ignition on. wait about 10 sec. the trip meter may reset but it will reappear to what it was before resetting the spanner symbol if done right. if done right. the spanner should dissappear.
If you mean the orange light showing oil can and spanner hold both foot brake and throttle, turn on ignition and hold for 30 seconds. The light will flash, turn off ignition job done.
Switch ignition ON. Press the button on end of right hand stalk until spanner symbol flashes and the distance remaining to next service appears in the display. Press and hold the trip reset button for 10 secs until new service interval is displayed.let go of stalk. Turn ignition off.
it means the car is ready for a service/ My vectra displays a oil can and spanner when a service is due, if you cannot afford a survive do the following: place keys in ignition but don't turn on, press the button that zeros the miles on the dash and hold it in, place foot on brake and also hold it down, turn ignition on but do not start engine, count to five and release button and pedal, turn ignition off then on again and the service light should havd gone out. When i get a spanner and car come up it says there is an electrical fault.
ignition off press and hold the button next to the seatbelt light switch on ignition keep the button down untill display is at 0 and spanner is off turn ignition off All O:K:
All you have to do is turn the ignition off and press and hold the left button on the dash and then turn your ignition back on there will then be displayed a symbol of a spanner and a timer starting from 10 and wait for it 2 count all the way down then turn your ignition off and job done.
Turn on the ignition but do not start the car, press the button on the end of the wiper arm until the "miles to next service" is displayed on the odometer. Then press and hold the trip reset button until the display resets to 18000. This should also turn out the service and stop light. Turn off the ignition then restart the car.still light is on