Want this question answered?
On a 1997 Ford Explorer : The push button switch to turn on and off the fog lights is in ( the center stack of the dash , to the right of the radio )
Try pushing your turn signal lever forward , that's what I do to turn on my high beam headlights on my 1995 Ford Explorer
On a 2002 Ford Explorer : On the headlight switch , select automatic , park lights, or low beam headlights and pull the headlight switch out towards you to turn the fog lights on ( push the switch in again to turn the fog lights off )
Most likely turn signal flasher
Turn your headlight selector switch on your dash to the low beam position and pull the knob towards you to turn on your fog lights
They are supposed to turn on when the engine is started and the emergency brake is released , at least that is the way it is on my 1995 Ford Explorer
The daylight running lights of a Ford Explorer can be turned off by using the manual headlight control switch. Place the switch in the middle position to turn the daytime running lights off. The headlights will then need to be turned on manually at dusk.
The turn signal flasher on a 2006 Ford Explorer is under the dash on the driver's side. This vehicle has two flasher units, one for the turn signals and one for the hazard lights. They are next to each other.
2002 ford explorer turn signals not working
If the Explorer is running engaging the parking brake is supposed to turn the daytime running lights off , otherwise the daytime running lights are supposed to shut off when the engine is shut off . I have a 2004, Eddie Bauer Explorer. On the light switch itself, there is a selection to turn on or off the day lights, as well as the extended, courtesy lights after ignition is turned off.
Bad earth connectionat light cluster
engage the parking brake , or shut the engine off