Toggle the POWER button to the left of the gear shifter.
According to the repair manual: Remove the grommet from the speedometer and turn off the lamp by pushing the warning light reset switch, then replace the grommet.
According to the repair manual: Remove the grommet from the speedometer and turn off the lamp by pushing the warning light reset switch, then replace the grommet.
1. Change your filter 2. With the key off unplug the wires on top of the filter housing 3. Turn key on then plug wires back in 4. Turn key off then start car.
press and hold trip odometer button. Put in key an turn to accessory. Light eill flash then go out.
It is the combination turn signal, high beam, head light switch.
Turn ignition on disconnect wires on top of fuel filter housing, leave for 10 seconds, replug together wires, turn off ignition.light should now be reset
On the turn signal lever next to the headlamps switch. It's the one that controls the dashboard light brightness
The fog light switch is on the end of the turn signal switch. Just pull the end of the turn signal switch and the fog lights will come on. (Turn signal switch and fog light switch are one assembly)
Check your turn fuse. Or the connection between the flasher and the turn signal. Sorry I mean check the connection between the flasher and the turn signal switch.
Yes, flicking the light on and off fast does waste power. Turn the light on only when you need the light to see something in that room. Turn the light off when you leave the room to conserve power.
flat head screw driver in the hole in the light...... unscrew and turn wire harness 1/4 turn and light will come out of lense. replace bulb. replace and screw back in.
Turn key on.Set odometer to odo not trip a or b.Turn key off.Press and hold trip setter. With trip setter still held turn key on, continue to hold trip setter for 5 seconds.Reset Main req light after an oil change.Read more: http://wiki.answers.com/How_do_you_reset_the_Maintenance_required_light_in_a_2005_Toyota_highlander#ixzz1jmHLcZ6B