Want this question answered?
use a voltage tester to see if there is voltage at the base pin
It`s testing the isolation of the cable. You use a isolation tester with 250,500,100Vdc depending on the cable
To my own understanding, you will use multi-meter to test for the polarity
The only way I know how to tester one is with a device called a Flicker tester. I know Mitchell Instruments sells them for under $100.
The optimum pH level for tomato plants is 6.0 - 6.8. You should use a soil tester to determine what the pH level of your soil. The proper pH level will grow much better tomatoes. Rapitest makes a specialized tester just for tomato plants.
how to use electrical earth tester
land tester is use for check a utp cable..if is worth
a blood tester
it is use for ate tester
You can use a wire tester to check for a ungrounded wire. Attached the wire tester to the battery posts. The tester will show you if the ground is weak or strong.
can i use a tester for GBI 22v leaf blower to see their a spark on ignition on blower
Need to know what you are testing to answer that one.
I freakingly don't know! TT____________TT
use a continuity tester on the switch itself just hold contacts on tester to contacts on switch and if it reads with a beep or a light your switch is good pending the tester is accurate
there is lan tester available in the market, we have to connect one side of the crimped cable to one of the part of lan tester and the other side crimped cable had to be enter the other part of the lan tester... then we have to on the lan tester and we are able to visible LED's blinking one after the other , if not ther is a problem in crimping the cable..
Yes there is a tester. Go to your local electrical wholesaler and ask for a volt stick. Do not use a neon screwdriver as they kill people!!!
we may use a LED in place of a bulb in a tester as LED glows even when there is a small electric current flow through it