Just set to AC or DC volts and probe the two points you wish to measure voltage across.
Multimeters are instruments used to test, measure and monitor electrical devices, such as circuits, electrical components or wall outlets. The two types of multimeter are analog and digital, with digital being the most common due to accuracy and ease of use. Analog ones have displays that use moving needles, while digital ones have digital readoutsAnswerA multimeter is an instrument that combines the functions of an ammeter, voltmeter, and ohmmeter. So it can be used to measure current, voltage, and resistance.
Use a multimeter to measure the voltage.
multimeter
a VOM is typically used to measure resistance, potential (voltage) and current (amps).
You can use many things. For most purposes, you can use a digital or analog multimeter. They can measure voltage, current, resistance and sometimes capacitance. If you need to measure a signal that is at a very low voltage (<1 volt) you may need to use a oscilloscope. They can measure voltage and also show the wave form. If you don't need to see the waveform, you can find some multimeters that can measure under 1 volt. The most common device to use is by far the multimeter. You can find them at stores like Radio Shack, Jaycar and on the Internet. (eg. eBay and other electronics sites)
Resistance is measured with an ohmmeter. A link is provided to a brief article on the ohmmeter posted at Wikipedia.Note that it is unusual in this day and age to have a device that will measure ohms and nothing else. The ohmmeter is usually included among the functions of a multimeter, and usually a digital multimeter or DMM.
Analog multimeters use a microammeter with a moving pointer to display readings
A: A VOM can measure the voltage across the load. To test the current if the current surpasses the VOM range just add a very small resistor in series with the load and use ohms law to find the current since you have the voltage drop.
Voltmeter or multimeter.
You will need a multimeter and instructions on how to use it.
Well, you do use a multimeter to measure it, but not directly. You need at least one other thing besides the multimeter and the dry cell. Here's a simple way to do it: -- Take a resistor. With the meter set to measure resistance, measure the resistor's value. Call that 'R'. -- With the meter set to measure voltage, measure the voltage of the dry cell. Call it 'V1'. -- Connect the resistor across the dry cell. Measure the dry cell's voltage again. Call it 'V2 ' this time . V2 will be less than V1 . The internal resistance of the dry cell is R times (V1 - V2) / V2
A multimeter is used to measure various properties of electricity. The "multi" refers to it multiple functions which can range from volt meter, current meter, resistance meter. The most common use would depend on the users preference to what is needed and measured most frequently.