I fixed my toilet with a rotor.
I use a micrometer the rotor should have minimum thickness stamped on the rotor is inches or millimeters
They use the main rotor
The rotor thickness for your 1997 Pontiac Bonneville is 0.75. When the rotor falls below this thickness a certified mechanic can no longer use the rotor.
A '99 Intrepid doesn't use a distributor, so no cap and rotor.
The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.
low pressure rotor as i know in some of the thermal power plant they may use for this type of rotars
There is a engraved number on the outer rim of the rotor. This will be where the rotor is the largest in diameter. It will be hard to read if the rotor is rusty. This number is the minimum recommended thickness. You may have to use a dial caliper to accurately measure the rotor.
To limit the fault current used surge protective resistance in generator rotor winding to protect the rotor winding heavy damage.
i do not know how to use embalming in a sentence. (there is the sentence)
A 'squirrel cage' rotor is used in an a.c. inductionmotor, meaning that there is no electrical supply to that rotor with the currents in the rotor , instead, being the result of induced voltages caused by currents flowing in the field windings. A rotor of a d.c. motor, is electrically connected to the supply. The two types of motor work on completely different principles, so cannot use a squirrel cage rotor.
sumtimes in a moving car suddenly the car goes off.....if the car doesnt start again,...one of the reasons might b damage of rotor.. to start car again v need a rotor...
If you mean the rotor from inside the distributor. Just unclip the 2 clips and lift up the distributor cap then use a nut driver to remove the 2 bolts on the rotor.