0
What else can I help you with?
Do I need more than one channel to use multiple car subwoofers?
You can use one channel for a dual woofer setup.
Can you use a 2 channel amp for front and rear speakers?
Use 1 channel for fronts & the other channel for the rears.
How do you connect JUST the sub woofer from a 2.1 PC speaker system to an Amp the speakers usually get power from the Sub woofer and the sub woofer gets sound from the speakers?
A sub from a 2.1 PC speaker system usually has the amplifier for both itself and the satellite speakers. You should be able to disconnect the satellites and use the sub by itself. You cannot use a speaker output from an amplifier to drive this sub, as the level is too high, but most surround receivers have a 'Sub Out' line level in the form an RCA jack. You can connect this using adapters to the 1/8" cable that plugs in the sub.
What does 2 channel compatible mean for use with one amp?
Easy Question--- One Channel is for the "High End" or Trebble-- The Other Channel is for the "Lower End" or Bass partition of the amplifier-- Careful not to hook up High End speakers to the "Bass Channel, as they will generally POP like the WEASEL!
Can you hook both a subwoofer and speakers to 1 amp If so do I need to buy a amp that's even more powerful Then what the sub requires?
You can connect a sub and speakers to one amp, depending on how many channels your amp has. A 4 channel amp will be able to run one (or two) subs using two channels (one bridged* sub or two subs) and two speakers running one channel each. A 2 channel amp will run 2 speakers or one bridged sub. A 6 channel amp will run one bridged sub (or two subs), 2 front speakers and 2 rear speakers. In my opinion, you will get the most performance, depending on which amps you use, by using a monoblock amp for your sub and an amp with enough channels to run all of your speakers. # Bridged = putting together the power of two channels to run one sub or speaker. Note: not all amps are bridgeable.
can you use 7.1 receiver with 6 speakers?
Some where in the 7.1 receiver there is a menu for speaker setup. Set this for the number for speakers you have and how they are arranged around the room. My Denon even ask for the size of each speaker (large or small). and if you are using a sub woofer or not.
What is a 3 4 and 5-Channel Amp used for with bass in a car?
With Subwoofers only, you would want to go with only a 1 channel or 2 channel amp, 5 channel amps are designed to power 4 smaller speakers, and 1 subwoofer. Each channel basically refers to a different speaker - if you're using 2 regular left and right Speakers (not Subwoofers), use 2 channel setting, if you have 4 Speakers plus a subwoofer, use 5 channel setting. Make sure subwoofer is tested with the lowest gain/volume.
Could you power a set of speakers and a sub with a two channel amp?
yes ------------------------------------------------------------------------------------- You could if you know how to wire the speakers in the proper sequence. You also must know how use capacitors on the sub to make it respond only to bass! It is best to use a different amp. Seriously!!!!!! Y-THINK-Y * And while they do make commercially available accessories that do what Y-T-Y says, by the time you buy one that works for your situation, install it, etc., it will probably be cheaper and you'll get a better result just getting a specialized sub woofer amp.
What is better 16 ohms speakers or 8 ohms speakers?
It depends on the application. If you have an amp that is stable in 8 ohms per channel, then 8 ohm speakers will work best. However, if you wanted multiple speakers on that channel you could use two 16 ohm speakers.
Are there any computer speakers designed for use with 5.1 Channel Surround Sound?
The Logitech Z-5500 Digital 5.1 Surround Sound Speakers are a great choice.
Can you use door speakers as well as parcel self speakers Is there much point?
If you have a 4-channel stereo installed, then there is a point. The door speakers would be front, left & right channels, the parcel shelf speakers would be rear, left & right.
Can you wire your 6by9 inch speakers straight to your sub woofer?
Yes, you can wire 6x9 inch speakers directly to a subwoofer, but it's generally not recommended. Subwoofers are designed to handle low frequencies and may not effectively power high-frequency speakers like 6x9s. Instead, it's better to use an amplifier or a crossover system to ensure proper frequency distribution and prevent damage to your speakers.
