0
What else can I help you with?
Why would the amp radio in a 1996 Suburban not be working where the two front speakers are ok but the center two and rear two are not?
According to http://www.installdr.com/Harnesses/GM-Wiring.pdf the connector for the rear speakers is separate from the front speakers. If the connector for the rear speakers is loose or disconnected, the rear speakers would not work while the front ones will. The amp in the head unit (dashboard radio) powers the front door speakers. The rear door speakers and roof (pillar) speakers in the rear are powered by a second amp under the drivers seat. Either this amp is bad or is not hooked up.
Can I connect two 2 ohm speakers to the front channels of my amp and then connect 2 4 ohm speakers to the rear channels of my 4 channel amp?
This depends on your amplifier's specifications. i would recommend looking in the amplifier's service manual to avoid disapointment or damage to your amplifier or speakers.
99 jeep Cherokee sport with factory am FM tape CD and 4 speakers front and rear the two front speakers got static and quit speakers tuner or amp?
It could be a combination of wires and the amp, but I would start with the amp.
Can you hook both a subwoofer and speakers to 1 amp If so do I need to buy a amp that's even more powerful Then what the sub requires?
You can connect a sub and speakers to one amp, depending on how many channels your amp has. A 4 channel amp will be able to run one (or two) subs using two channels (one bridged* sub or two subs) and two speakers running one channel each. A 2 channel amp will run 2 speakers or one bridged sub. A 6 channel amp will run one bridged sub (or two subs), 2 front speakers and 2 rear speakers. In my opinion, you will get the most performance, depending on which amps you use, by using a monoblock amp for your sub and an amp with enough channels to run all of your speakers. # Bridged = putting together the power of two channels to run one sub or speaker. Note: not all amps are bridgeable.
2 door speakers do you need a 4 channel amp?
No that would be a 2 channel amp. 1 speaker per channel. 2 speakers= 2 channels 4 speakers= 4 channels
How do you install an amp to 95 riviera?
Run your power, ground, and remote wires. Then connect your RCAs to the back of your CD player and your amp, then connect your speakers to the amp..-ShockerI don't think the factory stereo has rca plugs in the back. You can run wires off the rear speaker wires of the stereo and wire those to rca plugs which you hook to the amp. Then you will have the rears running to the amp (for sub install). If you planned on using a 4-channel amp for all of your speakers, you could run rca's from the front channel wires and from the rear channel wires. Since they're going to an amp it won't effect the ohm rating going to the stereo.I had to do this in my Fiero when I had an older CD-player that didn't have RCA plugs. A new stereo with sub outs and front and rear outs created much better sound.
Which speakers will work best with my new 4 channel amp?
All speakers will work with a typical four channel amp, though you may want to check the wattage before you pair it with some speakers.
When you unplug the rear speakers in a car from your 4 channel amp and just power your sub will all the power from the amp go directly to the sub?
depends on the wiring check out Subwoofer Wiring Diagrams
What is a channel in amplifier mean?
a channel refers to the speakers or subs. for example a 2 channel amp can power 2 subs or speakers. a 4 channel will power 4.
What is the difference between a 2 channel and 4 channel amp?
dont know -------------------------------- EDIT: 2 Channel if really what its sounds like, 2 channels which means you have a Left + Right basically. 4 Channels is for 4 channels which like in a car would be Front Left + Right and Rear Left + Right. Reminder!!! Check RMS NOT max Power!!! -TheRamMan-
What is a two channel amp?
A two channel amp, in simple terms, means that it amplifies two different inputs channels (left and right usually, or could be front/rear), and outputs them into two different channels. Other types of amps you may run across is a one channel amp, which again amplifies one signal or channel.
For your 4 door speakers in a car how many channel amp do you need?
A 4 channel will work for your door speakers. But the idea setup would be a 5 channel 4 for your doors. Then have 1 channel for a sub.
