Hyperbeam will weld anything!
have a 92 sunrunner , passenger door main frame the two nut came though it, how can i weld them back in
You can weld the nut if you want, but hope that you never have to have the inner part of the trans worked on.
either beat an old socket over it till its tight or else if ya have a welder, weld a bolts onto the nut its handy..
If your lucky you can pound a smaller socket onto the nut and remove it. More often than not you need to weld a larger nut onto the stripped one, then turn the larger nut. Most tire shops can help if you don't happen to own a mig welder.
Weld a larger nut over the broken bolt and let it cool. It will turn out for you.
Depends on what you are welding, but generaly welds can meet, or even weld on top of a weld.
Theodore Weld
The address of the Weld Public Library is: 25 Church Street, Weld, 04285 0120
Get a nut that fits the threads on the O2 sensor, or cut the socket out of the old header and drill a hole in the new header in about the same place as the old one, weld the nut or socket over the hole and attach the O2 sensor.
The address of the Weld Historical Society is: Po Box 31, Weld, ME 04285-0031
A butt weld is a weld made between two straight cut profiles , a socket , or plug weld is made between a surface and a hole.
WELD - AM - was created in 1956.