I've never wired a harley starter but I've wired most everything else and they have been pretty much the same. You will have a large lug on the solenoid for the positive battery connection. There will also be a small connection for the start signal from the ignition switch. It is hot only when the switch is in the start position. There may or may not be a ground connection. I've seen it either way. If it fails to start, ground the starter case to the frame. That should pretty much do it.
Its located on the outside of the wheel well, behind the oil bag... a wire runs from your starter directly to the relay, which is a small inch squared black box.
Remove the starter. the solenoid is mounted on the starter.
install starter motor
What model?
how do you connect the wire from the alternater to the starter?
The ignition wire in a Nissan 350z is black and red. The starter wire is white/red and the second starter wire is white/green.
The Chevy starter does not have a ground wire, the starter grounds through the starter casing.
One can find a Harley starter for sale at a Harley-Davidson store nearby. A store can be located by visiting the Harley-Davidson website and using the store locator. One can also purchase starters online.
It is the ignition wire. The purple wire goes to the small stud on starter.
Are you referring to the battery wire that goes to the starter? If so replace the wire. By disconnecting it and follow wire to the starter and replace. Reconnect battery and your done.
follow the battery cable to the starter, you can't miss it.
why would my starter wire burn, going from starter to battery