i took mine to a cycle shop about an hour later the thing was sweet
I need wire harness color codes for a 1985 250 suzuki quardrunner.
Not Even Pull Start?Mine would pull start but not electric. I found out that it was just a bad wire, so I put tape on it and it worked.
Probably running to starter do to overheating
I think you can by attaching it to you spark plug wire
Black with white tracer
The ignition wiring can vary with different years of Warriors. The system should have two wires for run and two wires for kill. a wiring diagram for your particular year will show the color codes for the exact wiring.
You unhook the two wires that lead from the ignition to the electrical.
Take the ignition wire apart from there take a jumper wire and go from the red to the black
No, you don't have to change the wire, but the wire supplied with most all-in-one systems is quite thin. If you are running the wire for long lengths, you might consider upgrading to a thicker wire to minimize the signal loss.
The blue color is an example of the color used on a rectifier on a 2000 Yamaha Vstar 1100 classic.
on the coils from back to front it is 1423 for plug wire location
it is very easy only with 2 bolt and power wire