answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you wire touch light control ta-306a?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Electrical Engineering

Is the white wire safe to touch?

Never assume that any electric wire, no matter what color it has, is safe to touch.


Do you need 3-wire romex to feed bedroom ceiling box by electrical code?

No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.


What is the wire that gives off light in a light bulb?

In an incandescent light bulb the wire that gives off the light is called the Filament.


What does it mean when there are two black wires in an eletcric box when changing a light?

Some light fixtures do not have a grounding wire. In such cases the two wire going to the light may both be black. You can connect black supply to either black light wire and white supply to the other black wire.


How do you hook up a light and switch from an existing light?

Add a light to switch from a different circuitI think here your concern is that you don't want change the performance of the circuit to which you add the light.so you have to use a relay or a solid state relay to the circuit and a separate power supply to the light in compliance with all the safety rules.

Related questions

Will two batteries and a wire make a light bulb light?

first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb


Where do you connect the light blue wire of a xplod stereo?

Light blue is for steering wheel controls or a wire remote control.


How do you make a battery light a light bulb?

Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb


How do you light a light bulb without a light socket?

Take a lightbulb so the bottom touches on end of a battery. Take a wire and touch the battery and the other end to the lightbulb.


What wire is positive in the back up light on a 2001 Chevy siverado?

normally the white wire is but take a test light and a long pice of wire and connect the wire to the battery with one end of it and put the other end on the test light, make sure you dont touch the wire to any medal on the truck, use the test light and test the wires form the bulb socket to see which one lights up, that will give you the ground wire


How do you convert don't touch live wire to passive form?

Live wire is not to be touched. or Live wire touch not..haha


What is the reason for glowing of light in electric tester?

A small current is flowing through the light. In an insulated screwdriver with a neon tester, you put your thumb on the top and touch the other end on to the wire. It's best to make sure your other hand is behind your back and that you are not touching anything else. A live wire will light the neon. But if the neon does not light, that does not mean the wire is safe to touch. The power must be turned off back at the main switch before anything is touched.


What do you need to have a simple circuit?

Take a battery, a wire and a little light bulb. Put the wire on the flat part of the battery then put the other end of the wire on the side part of the bottom of the light bulb. Put the end of the light bulb on the top of the battery, dont touch the wire to the top when the light bulb is on it because is either shocks you or doesnt work.


Before you touch a wire in an appliance how should you make sure that it is NOT hot?

You can use a wire tester to determine if a wire is live. You can also touch the positive wire on the ground wire, if the wire produces a spark it is live.


Where is your issue when all the boat trailer lights work when they are hanging but when you touch the bolts on the light to the trailer they get stuck on?

poor ground wire


What is a light wire?

A light wire is probably a wire with light in it, but to be honest, I haven't really heard of it. lol


Is the white wire safe to touch?

Never assume that any electric wire, no matter what color it has, is safe to touch.