Want this question answered?
No they stop bringing them to Canada in 2008
Yamaha stopped making the Warrior in 2004, and started making the Raptor.
Epa and Emissions
Fuel filter clogged safety switch malfunction kill switch bad oil level monitor/ oil below level carb jets clogged spark plug fouled plug wire grounding start stop switcbad bad run relaay
2009
take cigarettes away from it!
A stop switch is wired in series with the power supply and the load.
The CHMSL (center high mounted stop light) is activated by a circuit independent of the outboard stop/turn lamps. Outboard stop lamps become left or right turn signals when interupted by the turn signal switch/flasher circuit. The CHMSL must remain independent to escape the interuption of the turn flasher. The circuit that powers the outboard stop/turn lamps and the CHSML share the same fuse on GM, Ford and others are probably the same. The 12v feed passes through the brake light switch before it splits to independent feeds: one straight to the CHMSL, the other to the turn switch/flasher which splits it into a separate feed for either the left or right lamps. My best guess is your OK at least to the brake switch. The problem lies beyond and my experience would lead my initial search for a faulty ground in the rear lamp harness. Good luck, it's a cold day for working on a car.
It is the brakes light switch
1985
The stop lamp switch is on a bracket above the brake pedal.The stop lamp switch is on a bracket above the brake pedal.
The function of a stop switch is to cut the ignition so the engine can stop. If the switch is in the off position and the engine isn't running, then to start the bike you'll have to put it to the on position.