You need 60 feet of 10 gauge wire in two colours. Blue and black preferred.
Two automotive 30 amp breakers.
Auto motive crimp connectors for 10 gauge wire to:
Screws to attach breakers to fender or equivalent under hood power supply
Run 1 black lead from battery supply to breakers.
From breakers run 1 blue and one black to under dash.
Black wire continues though car to rear bumper plug. This connects inside 7 way plug to Black or battery connection.
Blue wire connects to battery wire on brake control. Then also connects to brake output wire on the controller then runs with black to back bumper. It connects to blue or brake connection.
The brake control will need to be grounded to a good ground under dash.
The brake control will have a wire that will need to be connected to the wire that feeds the brake light bulbs at the brake light switch. Use a Meter to figure out what one it is. A test light may burn out something expensive.
Finally the 7 way plug on the back must be connected to ground (white or ground terminal) to ground with a 10 gauge wire.
I would recommend for signal lights etc on the trailer you get a "HOPPY" or other "tap" kit to patch into the taillight wiring.
I, as a guy that does this regularly, can do the whole thing in 3 hrs or so.
First timer allow 8 hrs.
no there is not a factory tow package for the tracker, any tow package that you put on your tracker you will also have to install a transmission cooling system so you do not fry your transmission and damage your transfer case, you can get one at your local uhaul company.
3500lbs with factory towing package.
If it came from the factory with the tow package option, yes.If it came from the factory with the tow package option, yes.
You need to download a program called Speakonia. Download the program itself, and the package "Microsoft Voices Mary, Sam and Mike (7.5mb)". Install Speakonia, and then install the package. You will also get other voices as well.
Install your OpenOffice.org package from the package installer (through the RedHat network).If open office is a .org package then you need to install the wine package according to the Linux version you are using,then you can install and run all types of .org packages using the wine application in the Linux OS.
Depends what year and what trim level, and if you have the factory tow package. With the factory tow package, you can tow 9100 lbs. Without it, you can either two 7400 or 6100 (LE/SE or XE). You can generally tell if you have the factory tow package by the presence of the pull-out mirrors.
In Linux it will install an RPM package with the following arguments: -U (upgrade) -v (verbose logging) -h (hash showing installation percent) This is great default way to install RPMs. If there is no existing package to upgrade, it will still install the package. If there is a newer version of the package already installed, it will tell you that and exit without error.
install the package design software in the computer, then design package on computer, kasemake is a great package design software.
Some of the factory options for a Lexus GS are the premium sound and the wheels package. They have a leather package and also have onstar in some of thier cars but can be an option in the GS.
A package manager is a utility to install remove, upgrade, and track the dependencies of software in Linux.
1. Install synaptic package manager, if you don't already have it. 2. Find the VLC Media Player and select install. 3. During the installation, there should be a checkbox that allows you to "Download Package Files" only. 4. You can run the package files later and install offline.
Either use the software manager for your distro, or use the Synaptic Package Manager. (Note: you may need to use: sudo apt-get install synaptic).