0
Once the alarm goes off - and you press the snooze button, it starts an internal timer for a given period (usually 6-10 minutes depending on the manufacturer). Once the internal timer reaches zero, the alarm is triggered again and the snooze timer resets to its original period. You can usually hit the snooze button indefinitely, but to silence the alarm for good, you need to switch the alarm off.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Why doesn't any alarm clock make you get up in the morning for work?
Two things you can do to help remedy the situation: 1. Get a LOUD alarm clock. Test it out at the store before you buy. 2. Put the alarm clock across the room so it forces you to get up and get out of bed.
How does a spring-driven clock work?
A spring driven clock is wound and that creates energy for the clock to work.
How does a fruit clock work?
a fruit clock? what is that?
What are physical characteristics of a clock?
If we dont have clock so we can not do any work at the time clock we need more and more .
How does analog clock work?
Crestside
What is a computer alarm clock program?
An alarm clock computer program allows the user to set alarms throughout the day. One can attach a music or sound file to the alarm, adjust the settings and even press snooze, just like a normal alarm clock.
Instructions for skyscan atomic clock model 86742?
SkyScan Model 31981B TO START THE CLOCK:1. Insert 2 AAA batteries with proper polarity (+) and (-)as indicated In the battery compartment.2. The LCD goes to default time and calendar 12:00:00AM (time) and 1-1 (Jan 1 2003).The alarm time is 6:00 AM.Default time zone is PST, default temp. readout Is degree F.3 The clock takes the temperature reading immediately then starts to search for the WWVB signal. Remarks: If you immediately manually set the time / alarm time / calendar the clock will slop its initial reception of the WWVB signet. It will resume to the WWVB reception automatically when the clock exits SET mode and no other button is pressed for 5 seconds.TO SELECT THE TIME ZONE:1. Press TIME ZONE button once, the LCD shows the time zone (the default time zone is PST).2- Press + or - - to set the time zone (PST>MST>CST>EST)3. Press the TIME ZONE or SET button to go back to the time display or it will automatically go back to the time display in 5 seconds.TO SET TIME, CALENDAR, 12/24HR AND C/F:1. Press the SET button once to set the Year: digits show '2003" and blink. Press + or - - to set the year.2. Press the SET button again to set the Date : small digits show " 1 - 1" (i.e. Jan 1st) and blink. Press + or - - to set the date. Press and hold + or - will increase the increment or decrement at a faster rate.3. Press the SET button again to set the Time : large digits in HR : MIN will show and blink.Press + or - to set the clock to the current time. Press and hold + or - will increase increment or decrement at a faster rate.4. Press the SET button again to set 12 / 24 HR readout. Upper LCD shows "l2Hr" and blink.Press + or - to choose 12HR or 24 HR time display format.5. Press the SET button again to select C/Freadout: the temperature readout (i.e. 68F) will blink. Press + or - to choose readout (i.e. 68F or 20C ). The default readout is In degree F.6. Press the SET button again to exit the setting mode and return to the normal display. Or it will automatically return in 5 seconds. **Special attention for usage in Arizona and Indiana.**Part of Arizona and Indiana do not have Daylight Saving Time (DST).Please slide the DST switch inside the battery compartment to OFF if the clock is used in these states.TO SET ALARM TIME ;1. To read your alarm time: press + or - once, the lower Month and Date digits will change to alarm time digits.2. To set the alarm time: press + or - again, the alarm digits will blink, Press + or - - to set your alarm time. Press and hold + or - will increase the increment or decrement at a faster rate..3. Alter you set the alarm, the clock will go back to the normal display automatically in 5 seconds.TO TURN ON/OFF THE ALARM:1. To use snooze alarmPress the SNOOZE / AL ON/0FF button until SNZ and (((o))) show on lower LCD.When the alarm beeps, press SNOOZE / LIGHT bar. The alarm will Sound again when the snooze periodis over. (See "To Program the Snooze Alarm " below)When the alarm beeps, press any key at the front to stop the alarm. The snooze alarm will turn on the following day at the same time.2. To turn on alarmPress the SNOOZE /AL ON/OFF button until (((o))) shows on lower LCD.When the alarm beeps, press SNOOZE / LIGHT. The alarm will turn on the following day at the same time.3. To disable the alarm permanently:Press the SNOOZE / AL ON / 0FFbutton until the SNZ and (((o))) clear from the lower LCD.TO PROGRAM THE SNOOZE ALARM:1. Press and hold the SNOOZE I LIGHT bar for 3-4 seconds. The small display will blink and show 05 (minutes) the default snooze duration. Press + or - to set the snooze duration from 5 minutes to 60 minutes.Note: The minimum snooze duration is 5 minutes.2. Press the SNOOZE I LIGHT bar once to go back to the normal display or the clock will auto exit if no further buttons are pressed after 5 seconds.
Why do snooze buttons only work for 9 minutes?
The 9-minute snooze is a product of mechanical clock engineering and digital clocks have followed suit since. Mechanical clock engineers had to configure clock gears to work with the clock's other gears. They had two choices - to set the snooze for either a little more than nine minutes, or a little more than 10 minutes. Clock makers decided on the 9-minute gear, believing 10+ minutes would be too long and allow someone to fall into a deep sleep. Clock manufacturers today have the option to set snooze buttons at any length but it is most stick with the 9-minute custom.
How do alarm clocks work?
An internet alarm clock works the same as a normal alarm clock just it is based on the internet. You enter the time you wish the alarm to go off and as long as your computer is turned on and connected at the time then it will sound the alarm.
Why wont my blackberry 8520 alarm work?
Try going to the clock button and press the scroll pad and it should say set alarm. Then set to specific time and when like always or just weekdays. Hope this helped!
What gets you up in time for school and work?
an alarm from your alarm clock, iPod, phone etc.
What was the first alarm clock How did it work?
The first alarm clock was powered by water where if the water was at a certain height, it would go off with a beeping sound.
What was the alarm clock made do?
The alarm clock was made to wake you up in the morning so you wont be late for work, it is also made to make sure you do things at the right time.
How does a clock alarm work?
You set the time and the screen shows what time it is.. Simple
Will your alarm clock on your cell phone work where there is no signal?
yes it will cause it doesnt use the signal to set the alarm or time.
Why doesn't any alarm clock make you get up in the morning for work?
Two things you can do to help remedy the situation: 1. Get a LOUD alarm clock. Test it out at the store before you buy. 2. Put the alarm clock across the room so it forces you to get up and get out of bed.
How do you get the animation to work on your Small World Rhythm clock?
It depends on which clock you have. Is it a Rhythm Small World Clock Does it have a monitor button?
