A closed circuit with a power source and load.
LDRs are switches (when the light hits them they allow electricity to flow if there is a full circuit). So LDRs are different to photodiodes in that way!
The purpose of the diode is to prevent electricity to flow in the wrong direction in a circuit. The purpose of the diode is to prevent electricity to flow in the wrong direction in a circuit.
series circuit
Resistance. Where as in an electrical circuit there are resistors that restrict the flow of electricity
Electricity does flow back to the power plant. This electricity is what forms the circuit needed to actually deliver the electricity to you when you need it.
An open circuit.
One can close an open circuit by adding a complete loop of wire. This will allow the electricity to flow through the circuit, while electricity will not flow in an open circuit.
All electricity or electronic circuits will not allow the current to flow if they have switching devices in series in their circuits.
When there is a closed circuit, there is electricity flow.
To conduct electricity and allow the flow of current to the components on the circuit board.
The electricity will flow from higher potential to lower potential in a closed circuit.
When a circuit has a gap in it, everythig stops working because the electricity wont be able to flow around the whole circuit
When the switch is open, the circuit is not a complete circuit. Electricity needs a complete circuit of conductive material. The switch breaks the circuit causing the flow of electricity to be disrupted. When you close the switch, a full circuit is restored thus restoring the flow of electricity.
Circuit
Electricity does not flow in an open circut
if an electric circuit has potential difference. Electricity will flow only if an electrical circuit is closed.
the circuit lets electricity flow from onw to the other