answer 2 Assume an electric hot water cylinder. The cold water is introduced at the bottom of the cylinder, for upon heating, the hot water will rise to the top. If you put cold water in at the top, this would cool the hot water you had just paid for! The hot water will be taken from the top, for that is where it will be.
In an electric cylinder, there will be an electric heating element about 150 mm from the bottom of the cylinder.
[There will always be dirt and crud in the water supply, and some of this will settle at the bottom of the cylinder. Having the element above this will avoid the crud being disturbed each time the element is turned on.]
In the electrical circuit to the heating element, there will be a thermostat, to set the highest temperature to which the water will go. This is vital for safety, as water too hot can cause scolding.
In addition, the electrical supply authority may only allow you to heat your hot water for certain hours of the day, hours when the demand otherwise is least.
A cylindrical shape is chosen, for engineering strength. This will be thermally insulated, otherwise you will lose too much heat.
When you want to know when your hot water heater is broken, simply run your faucet and test the water. If it's cold, the heater is broken.
Yes. I would. If you are replacing the hot water lines, it is also a good time to drain the hot water heater and get rid of all the junk at the bottom of the hot water heater. That should be done once a year. Your hot water heater must be off when you do that, your hot water heater should be off when you drain your hot water heater. You will see boiler scale come out of your water heater. Leaving the boiler scale in your water heater makes it less efficient. It makes it harder to heat your water. It is the same as throwing money down the drain. If you want to give your money away, you should give it to the Salvation Army instead of the Utility Company.
It is called this as it heats up or brings up the temperature of cold water to hot. In other words, it is producing hot water by heating it. Some people incorrectly believe it is redundant to refer to "hot water" and "heater", but there are many other types of heaters, so the distinction of one creating hot water is entirely proper.
"A water heater stores water in a tank and heats the water with a flame at the bottom. The hot water rises to the top of the tank, while the colder water falls to the bottom near the heat source." A water heater is simply a tank of water with a heat source at the bottom. It can be set to a certain temperature and is dispersed throughout the home through the water infrastructure.
it puts cold water in and pushes hot water to the top
It is a water heater, not a hot water heater. There would be little point in using a hot water heater. I assume that is your point.
form_title= Tankless Hot Water Heater form_header= Save money with a tankless hot water heater. Do you need to remove an old water heater?*= () Yes () No Do you want an energy efficient water heater?*= () Yes () No Where will you be installing the hot water heater?*= _ [50]
THERE IS NO SUCH THING AS A HOT WATER HEATER.
There are a few possibilities why. Troubleshoot asking yourself these questions: Is the hot water heater switched on electronically? Is the stop cock switched on? Are there air locks in the line? Is the hot water heater connected?
It's called water heater. There isn't a reason to heat hot water
It's because "hot-water" is a compound adjective, modifying "heater". It's not for heating water, it's for heating a house with hot water. There are many types of heaters that heat water, but only a hot-water heater is used for providing heated water for domestic use. A hydronic boiler also heats water, but it's only for use in radiators.The name "Hot Water Heater" is completely wrong for any use. There is no need to heat hot water. IT has always been "water heater". The term hot water heater has just been used for years because people don't realize the difference. It has always been WATER HEATER.The first answer is jibberish and makes no practical sense at all.
If water is only drawn from the cold faucet, then no, the water heater is not involved. However, if water is drawn from the hot faucet- even for a few seconds- hot water IS withdrawn from the heater, and fresh cold water drawn in to be heated- even if the hot water did not make it all the way through the pipe to the faucet- and the water heater will work to heat that fresh cold water.
Yes. Hot water comes from the water heater. The blower motor propels warm air around the house through the duct-work, but is not connected to the hot water heater in any way.
new boiler and hot water heater
form_title= Electric Hot Water Heater form_header= Install an electric hot water heater. Is your current water heater electric?*= () Yes () No How old is your home?*= _ [50] What is your current monthly electric bill?*= _ [50]
Hot water in homes is produced by a device called a water heater. A water heater can be compared to a pot of boiling water. The enclosure keeps water hot throughout the day so that when the faucet is turned on, there will be an immediate flow of hot water. The people who have hot water have invested in a water heater.
The plumbing in my house needs replacing. Which is the best hot water heater on the market?