answersLogoWhite

0


Best Answer

Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install * To replace the belt rotate the tensioner pulley clockwise to release belt tension * Remove the belt from the auxiliary components and slowly release the tensioner * Route the new belt over the various pulleys again rotating the tensioner to allow the belt to be installed then release the belt tensioner

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How does a serpentine belt go on a 96-2000 cavalier?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where can you find a serpentine belt diagram for a 1995 Chevy Cavalier?

Get the Haynes/Chiltons manual. It should be there. Or go to the automotiveforums.com website.


Diagram for serpentine belt for 1999 cavalier 2.2?

http://media.photobucket.com/image/2.2%2099%20cavalier%20belt/publicx/watermarkphp.jpg there ya go


How do you replace the serpentine belt on a 1990 Chevy Cavalier 4 cylinder?

You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.


What belt has snapped on your car if it wont go?

serpentine belt


How do you get the serpentine belt back on after replacing the water pump on a 1990 Chevy Cavalier?

There is a schematic on the fan shroud. If not go to a used car lot and find a like car and draw a schematic,


Where can you find a serpentine belt routing diagram for a 1989 Chevy Cavalier with air conditioning?

IT IS ON THE FAN SHROUD> If it isn't there draw one before you take the belt off. If the belt is off, go to a used car lot and find a like car and draw a schematic.


Alternate routing of serpentine belt for 89 Oldsmobile cutlass supreme?

There is only 1 way the serpentine belt will go on, there is no alternate way.


How do you replace a serpentine belt on a 1997 Ford Taurus?

need diagram of the sepentine belt and how it go on.


How do you loosen the serpentine belt in a 91 LeBaron?

the Serpentine Belt on the 91 Lebaron is on Tension Pulley, you dont tighten it. But if it is loose and you need to tighten it you just go and buy a new belt and put that on.


What is size of serpentine belt on 1996 ford escort lx?

You have to go to an auto-parts store to buy the serpentine belt. Any auto-parts store can tell you the correct size belt to purchase.


How to tighten or loosen the serpentine belt in a 1995 Chevy cavalier z24?

I just replaced the serpentine belt on my 1999 cavalier Z24 today. There is a tention pully that constantly pushes on the belt to keep it tight. There is a bolt head in the middle of this pully. Normally it's 15mm. You'll need an open end wrench to put on the bolt head. Put it on and turn it counter clockwise. You'll feel the entire pully move and you will see your belt loosen. It's not a good idea to let go of the pully. Try to keep pressure on it till you get the new belt in place. Like I said I have a 99 Cavy there may be some differences but it should go about the same for you.


93 sundance serpentine belt diagram?

Go to autozone.com, select your make/model and they offer online service manuals. In there, you will find diagrams for serpentine belt routing.