0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Will the two-wattmeter method work for all three-phase loads eg unbalanced loads inductive loads capacitive loads and delta-connected loads?
Blondel's Theorem tells us that, to measure the total power of a three-phase load (balanced or unbalanced), we can use one less wattmeter than there are conductors supplying that load.So the two-wattmeter method will work for anythree-phase load, provided there are only threeconductors supplying that load, e.g. three-wire delta or three-wire star (wye).Bear in mind that wattmeter's read true power (expressed in watts) and ignores the reactive power of inductors and capacitors.
Will three phase power damage single phase appliances?
If you plug a single phase appliance into a three phase power supply, then you will be using single phase power. It does not matter if you are delta connected, AB, BC, or CA, or if you are wye connected, AN, BN, or CN. Yes, if there was "a problem", you would trip the supply. Question, however, is what do you define as "a problem"? Three phase power is intended to supply three phase appliances. Connecting a single phase appliance to three phase power is inconsistent with the objective, and such connection must have been performed by some kind of "jury-rigging". If you pull more than the trip current on any one phase, the supply should trip. If a malfunction in the single phase application, however, were to result in fault current that is lower than the trip current, you might not trip, and you might create damage and/or a fire. There is nothing wrong with building a branch circuit that feed a single phase load from one phase of a three phase source. You just need to provide the correct protection for that intended load.
How a 3 phase generator work?
For information about three phase electrical services see the answers to the Related Questions shown below.
How to convert a generator three phase output to single phase?
If the generator is a 12 lead reconnectable, you can use something called a zig-zag connection.Check the link below. It is an installation manual for a Marathon generator. Zig-zag connections are shown on page 8. For a home, you would use the low zig-zag connection for 120/240V (in the US). One caveat: you can only load a zig-zag single-phase connected generator to a maximum of 66% of its rated load. So, a 15kW 3-phase generator would only provide 10kW single-phase power. If this doesn't quite make sense, hire a pro!IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized.
How do you convert a 3-phase power supply to a single phase supply?
The simplest answer is that the electric utility uses a transformer across 2 of the 3 hot leads to develop a single hot lead with an earth reference. What follows below is frequently edited by both amateurs and professionals, with mixed results. Wikipedia is a better source of more detailed information on this subject, in part because the article on three phase power has pictures.
Can you make a three phase light ballast work on 110 or even 220?
No. A three-phase ballast requires three-phase power
Will the two-wattmeter method work for all three-phase loads eg unbalanced loads inductive loads capacitive loads and delta-connected loads?
Blondel's Theorem tells us that, to measure the total power of a three-phase load (balanced or unbalanced), we can use one less wattmeter than there are conductors supplying that load.So the two-wattmeter method will work for anythree-phase load, provided there are only threeconductors supplying that load, e.g. three-wire delta or three-wire star (wye).Bear in mind that wattmeter's read true power (expressed in watts) and ignores the reactive power of inductors and capacitors.
Will fan work without condencer?
a three phase motor will work
Does a two phase heater need a two phase thermostat?
Most electrical equipment are either designed to work on Single phase (two wires) or Three Phase (three or four wires). Two phase equipment are non existent today. A single phase heater will require a single phase thermostat while a three phase heater will require a three phase thermostat.
How does a three phase separator work?
A three-phase separator is used in the oil industry to separate oil, water and gas from a mixture.
Will three phase power damage single phase appliances?
If you plug a single phase appliance into a three phase power supply, then you will be using single phase power. It does not matter if you are delta connected, AB, BC, or CA, or if you are wye connected, AN, BN, or CN. Yes, if there was "a problem", you would trip the supply. Question, however, is what do you define as "a problem"? Three phase power is intended to supply three phase appliances. Connecting a single phase appliance to three phase power is inconsistent with the objective, and such connection must have been performed by some kind of "jury-rigging". If you pull more than the trip current on any one phase, the supply should trip. If a malfunction in the single phase application, however, were to result in fault current that is lower than the trip current, you might not trip, and you might create damage and/or a fire. There is nothing wrong with building a branch circuit that feed a single phase load from one phase of a three phase source. You just need to provide the correct protection for that intended load.
How a 3 phase generator work?
For information about three phase electrical services see the answers to the Related Questions shown below.
How to convert a generator three phase output to single phase?
If the generator is a 12 lead reconnectable, you can use something called a zig-zag connection.Check the link below. It is an installation manual for a Marathon generator. Zig-zag connections are shown on page 8. For a home, you would use the low zig-zag connection for 120/240V (in the US). One caveat: you can only load a zig-zag single-phase connected generator to a maximum of 66% of its rated load. So, a 15kW 3-phase generator would only provide 10kW single-phase power. If this doesn't quite make sense, hire a pro!IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized.
How do you convert a 3-phase power supply to a single phase supply?
The simplest answer is that the electric utility uses a transformer across 2 of the 3 hot leads to develop a single hot lead with an earth reference. What follows below is frequently edited by both amateurs and professionals, with mixed results. Wikipedia is a better source of more detailed information on this subject, in part because the article on three phase power has pictures.
How do you convert a 3 phase power supply to a single phase supply?
If the 3 phase circuit has a neutral (4th) wire, you can connect from one of the 3 phase wires to the neutral wire for a single phase circuit. You need to check the voltage with a DVM voltmeter or equivalent to make sure the 3 phase circuit is the correct voltage from one leg (wire) to the neutral for the equipment you wish to power. Be careful with this one as it may exceed your capabilities to do this work safely.Another answerYou don't need to "convert" a three phase service to a single phase service, you only need to take a single phase service from one of the lines of a three phase service.Working with a 3-phase electrical service is not a safe DIY project to be attempted by anyone who has not had the proper training and practical experience of working with high voltage electrical services. So, if you needed to ask this question, you should not be attempting to do this work by yourself!As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
How single phase 208 works without a neutral?
There must be a 'return' connection if the load is to work. So, you cannot simply connect the load to the line conductor and expect it to work. It must also be connected to the neutral. In some circumstances (e.g. with no ground-fault interrupter installed), it will also work if you connect it to earth (ground) instead of the neutral, but this will contravene most electrical regulations and should NEVER be done.
What is the Difference between single phase current and three phase current?
given a balance three phase, three wires system with star-connected load for which lime voltage is 230v and the impedance of each phase is (6+j8)ohm. find the line current and power absorbed by each phase.
