It divides the current according to the resistances ( inversely proportional) of the devices but the potential difference across each remains the same.
AnswerEach branch draws its own current. The sum of the branch currents will equal the supply current. Adding another branch will act to increase the supply current by the amount of current drawn by the new branch.
It's a mistake to say that the branches 'divide the current', which suggests that the supply current is constant and is then distributed between the branches.
Kirchoffs's current law states that the sum of all the currents flowing out of any point is equal to zero. In other words, the current flowing in is equal to the current flowing out.In the case of a parallel circuit, this means that if a single current branches into two or more parallel branches, then the sum of the currents in the parallel branches must be equal to the original current before it branched.
The current flowing through a series circuit is (voltage between the circuit's ends) / (sum of all resistances in the circuit). The current is the same at every point in the series circuit.
The net resistance can be found out using the algebraic sums f series and parallel connections. When there is no current flowing in the circuit the net resistance is infinite.
A series circuit is a circuit that only has one path for current to flow on, a parallel circuit is a circuit that has multiple paths for current to flow on. Parallel circuits are mostly used, especially in your house/home. The reason of that is because, if a device in a series circuit electrically malfuctions or goes down, it will stop the current flow, thus ending and cuting the whole rest of the circuit. In a Parallel circuit, if a device electrically goes down, current will still be able to flow through the other circuit branches, and the rest of the circuit, thus keeping electricity flowing.
In any series circuit, there is one and only one path for current flow. All the current flowing in the circuit will flow through all of the devices in that circuit. A break at any point in the circuit will cause current flow to cease. Lastly, it is current that is the same at any point in the circuit where we'd care to measure it.
Because there is many path for flowing current through circuit.
A parallel circuit is different in many ways from a series circuit: 1. In parallel, the voltage across all the devices connected is the same. 2. If a fault occurs in any device connected in parallel combo, then it has no effect on the operation of the other device. 3. In series circuit the current flowing through all the devices is the same while in case of the parallel one the voltage across all the devices is same.
Parallel Parallel
Current in a series circuit is the same throughout the circuit. Voltages are additive. Voltage in a parallel circuit is the same throughout the circuit. Currents are additive.
Kirchoffs's current law states that the sum of all the currents flowing out of any point is equal to zero. In other words, the current flowing in is equal to the current flowing out.In the case of a parallel circuit, this means that if a single current branches into two or more parallel branches, then the sum of the currents in the parallel branches must be equal to the original current before it branched.
A series circuit is a circuit with only one pathway for electrons (electricity) to flow! And a parallel circuit has two or more pathways for electrons (electricity) to flow!If you do not agree with me ask your teacher this exact question to see if i am right or wrong. If you agree with me just read the two sentences above until you have memorized it! Okay! Great!( :a thingseries circuit has a common current and a parallel circuit has a common voltage.
It depends on the resistance (or impedance) of that branch alone.
In series with the circuit and never in parallel. The reason being that it will cause the circuit total resistance to drop which will make the circuit draw excessive current. That's a short circuit actually.
This is called a closed circuit. If current was not flowing, it would be open.
The answer to this question is that in a parallel circuit there is more that one circuit or form of energy the circuit. In a series circuit there is only one form of energy in that circuit. Hope this helped you and gave you the answer!!!!!!!!!!!!! <3 :) if you look at a diagram of a parallel circuit, it looks like a ladder, where as a series circuit diagram looks like a rectangle <><><> "What are the differences between a series circuit and a parallel circuit?" In a series circuit there is only one path for the electric current to flow. If this path is broken, then the current will no longer flow and all the devices in the circuit will stop working. So if you hook up a bunch of light bulbs together, and one goes out, they all go out, and that can be a problem. In a parallel circuit there is more than one oath for the electric current to pass through. The current continues to flow through the other paths. So if one light bulb goes out of 20 goes out in a parallel circuit, they won't all go out, unlike a series circuit.
EMF (voltage) is the force that keeps current flowing in a circuit.
The current flowing through a series circuit is (voltage between the circuit's ends) / (sum of all resistances in the circuit). The current is the same at every point in the series circuit.